[Linux-PowerEdge] [Poweredgec-tools] c410x, GPU/M2050 and C6220

Philippe SENOT philippe.senot at univ-lorraine.fr
Tue Jul 9 03:33:09 CDT 2013


Hi Thomas,


Le 09/07/2013 08:39, Thomas Dargel a écrit :
> Hi Philippe,
>
>  is there a mezzanine card installed in addition to the HIC?
Yes.
There are 2 mezzanine cards: HIC card and Intel 82599 dual 10 GbE

> Could you check and post which mainboard P/N you have?
TTH1R
>
> #> /opt/dell/pec/bmc allinfo  | grep "Board Extra"
> [out of the bmc-packages from poweredgec.com]
>
> Furthermore, you should check if the iPass cables are connected 
> properly -- my
> impression of this type of connector is, that's always a gamble if 
> it's linked
> correctly, or not.
>
I verified again. It seems to be ok.
You can see that here:
https://filex.univ-lorraine.fr/get?k=PCKV9nSIOQnknTxrykl

> Could you check and post the BIOS- and BMC-versions of the C6620 and 
> C410x?
>
>  BIOS C6220: >= 1.0.28; better 1.1.19
>  BMC C6220: >= 1.24; better 2.02
>  BMC C410x: 1.28
>
My releases are all the same.
I'm using CentOS 6.3 and there is no xserver installed on the nodes.

Thanks for your help.


Cheers,

Philippe.


> Good luck,
> cheers,
>
>  Thomas.
>
> On 08.07.2013 16:09, Philippe SENOT wrote:
>> Hello,
>>
>> I'm using a cluster with one C6220 connected by HIC card with 4 iPass 
>> cables to
>> one C410x containing 8 GPU/M2050 connected 2 by 1 node.
>> Centos 6.3 is installed on C6220.
>>
>> I can't view the HIC Card and GPU.
>>
>> A " lspci" command shows nothing.
>>
>>
>> I sawthat Martin Flemming  had the same problem
>>
>> What kind of bios options did you disabled to see GPU??
>>
>> Thanks for your help
>>
>> Philippe.
>>
>> ************************************************************************************************* 
>>
>>
>>> /  From: "Martin Flemming" <martin.flemming at desy.de 
>>> <https://lists.us.dell.com/mailman/listinfo/linux-poweredge>>
>> />/  To: "Dell poweredge Mailling-liste" <linux-poweredge at dell.com 
>> <https://lists.us.dell.com/mailman/listinfo/linux-poweredge>>
>> />/  Sent: Tuesday, March 27, 2012 1:39:49 AM (GMT-0500) 
>> America/New_York
>> />/  Subject: c410x, GPU/M2075 and C6145
>> />/
>> />/
>> />/  Hi !
>> />/
>> />/  I've got a problem to get the
>> />/  NVIDIA M2075 PCIe x16 GPGPU Card in PowerEdge C410x
>> />/  to work with (at this time for two) C6145 :-(
>> />/
>> />/  ... lspci shows nothing about them :-(
>> />/
>> />/  After disable all special PCIE-BIOS-settings,
>> />/  one machine shows the controller :-)
>> />/
>> />/  42:00.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 
>> 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)
>> />/  43:04.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 
>> 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)
>> />/  43:08.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 
>> 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)
>> />/  45:00.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 
>> 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ff)
>> />/  46:04.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 
>> 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ff)
>> />/  46:08.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 
>> 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ff)
>> />/  47:00.0 PCI bridge: PLX Technology, Inc. PEX 8696 96-lane, 
>> 24-Port PCI Express Gen 2 (5.0 GT/s) Multi-Root Switch (rev ff)
>> />/  48:04.0 PCI bridge: PLX Technology, Inc. PEX 8696 96-lane, 
>> 24-Port PCI Express Gen 2 (5.0 GT/s) Multi-Root Switch (rev ff)
>> />/  48:08.0 PCI bridge: PLX Technology, Inc. PEX 8696 96-lane, 
>> 24-Port PCI Express Gen 2 (5.0 GT/s) Multi-Root Switch (rev ff)
>> />/  49:00.0 3D controller: NVIDIA Corporation Tesla M2075 Dual-Slot 
>> Computing Processor Module (rev ff)
>> />/  4a:00.0 3D controller: NVIDIA Corporation Tesla M2075 Dual-Slot 
>> Computing Processor Module (rev ff)
>> />***************************************************************************************************************************** 
>>
>>
>>
>>
>> -- 
>> -------------------------
>> *Philippe SENOT*
>> /Administrateur Systèmes au Laboratoire
>> Structure et Réactivité des Systèmes Moléculaires Complexes (LSRSMC 
>> UMR CNRS 7565)
>> *UNIVERSITE de LORRAINE* Institut de Chimie, Physique et Matériaux
>> /
>>
>>
>> _______________________________________________
>> Poweredgec-tools mailing list
>> Poweredgec-tools at dell.com
>> https://lists.us.dell.com/mailman/listinfo/poweredgec-tools
>>
>

-- 
-------------------------
*Philippe SENOT*
/Administrateur Systèmes au Laboratoire
Structure et Réactivité des Systèmes Moléculaires Complexes (LSRSMC UMR 
CNRS 7565)
Groupe de Physique des Collisions et Radio-biologie
Gestionnaire du parc informatique de l'ICPM

*UNIVERSITE de LORRAINE* Institut de Chimie, Physique et Matériaux
1 Bd Arago, 57078 METZ Cedex 3, FRANCE.
Tel. (+33) 03.87.31.58.63 Fax. (+33) 03.87.54.72.57 Abroad replace 03 by 3
/
http://lpmc.sciences.univ-metz.fr
http://www.srsmc.uhp-nancy.fr

  * Anglais - détecté
  * Anglais
  * Français

  * Anglais
  * Français

<javascript:void(0);>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20130709/2eb63b1c/attachment.html 


More information about the Linux-PowerEdge mailing list