[Linux-PowerEdge] LC remote changing from raid1 to raid0

Martin Flemming martin.flemming at desy.de
Wed Nov 14 11:38:58 CST 2012


On Wed, 14 Nov 2012, Ganesh_Viswanathan at Dell.com wrote:

> Hello Martin,
> Can you please share the output of GetPhysicalDiskViews and GetSoftwareIdentities?


voila !


--> GetSoftwareIdentities
Wed Nov 14 18:34:49 2012: GetSoftwareIdentities
wsman enumerate 
"http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_SoftwareIdentity" 
-h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y 
basic

^CSet $IP root:******@10.13.58.189
--> d
Wed Nov 14 18:35:16 2012: d
Invalid method 'd'
D failed
--> q
Wed Nov 14 18:35:17 2012: q
Invalid method 'q'
Q failed
--> exit
Wed Nov 14 18:35:19 2012: exit
flemming at ip-console3:/scratch/flemming/recite $ python recite.py 
IP=root:calvin at 10.13.58.189
Set $IP root:******@10.13.58.189
--> GetSoftwareIdentitie
Wed Nov 14 18:35:26 2012: GetSoftwareIdentitie
Invalid method 'GetSoftwareIdentitie'
GetSoftwareIdentitie failed
--> GetSoftwareIdentities
Wed Nov 14 18:35:30 2012: GetSoftwareIdentities
wsman enumerate 
"http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_SoftwareIdentity" 
-h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y 
basic

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID = 25227
   ComponentType = FRMW
   DeviceID
   ElementName = Integrated Dell Remote Access Controller
   FQDD = iDRAC.Embedded.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:25227
   InstallationDate = NA
   InstanceID = DCIM:PREVIOUS#iDRAC.Embedded.1-1#IDRACinfo
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 23
   RevisionNumber = 0
   RevisionString
   Status = Available
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 1.23.00
   impactsTPMmeasurements = false

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID = 25227
   ComponentType = FRMW
   DeviceID
   ElementName = Integrated Dell Remote Access Controller
   FQDD = iDRAC.Embedded.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:25227
   InstallationDate = 2012-10-12T15:04:13Z
   InstanceID = DCIM:INSTALLED#iDRAC.Embedded.1-1#IDRACinfo
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 23
   RevisionNumber = 23
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 1.23.23
   impactsTPMmeasurements = false

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID
   ComponentType = FRMW
   DeviceID = 0073
   ElementName = PERC H310 Mini
   FQDD = RAID.Integrated.1-1
   IdentityInfoType = 
OrgID:ComponentType:VendorID:DeviceID:SubVendorID:SubDeviceID
   IdentityInfoValue = DCIM:firmware:1000:0073:1028:1F50
   InstallationDate = NA
   InstanceID = DCIM:CURRENT#301_C_RAID.Integrated.1-1
   IsEntity = true
   MajorVersion = 20
   MinorVersion = 11
   RevisionNumber
   RevisionString = 0-0002
   Status = Available
   SubDeviceID = 1F50
   SubVendorID = 1028
   Updateable = true
   VendorID = 1000
   VersionString = 20.11.0-0002
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID
   ComponentType = FRMW
   DeviceID = 0073
   ElementName = PERC H310 Mini
   FQDD = RAID.Integrated.1-1
   IdentityInfoType = 
OrgID:ComponentType:VendorID:DeviceID:SubVendorID:SubDeviceID
   IdentityInfoValue = DCIM:firmware:1000:0073:1028:1F50
   InstallationDate = 2012-10-12T15:26:03Z
   InstanceID = DCIM:INSTALLED#301_C_RAID.Integrated.1-1
   IsEntity = true
   MajorVersion = 20
   MinorVersion = 11
   RevisionNumber
   RevisionString = 0-0002
   Status = Installed
   SubDeviceID = 1F50
   SubVendorID = 1028
   Updateable = true
   VendorID = 1000
   VersionString = 20.11.0-0002
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber
   Classifications = 10
   ComponentID = 26222
   ComponentType = FRMW
   DeviceID
   ElementName = Physical Disk 0:1:0
   FQDD = Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:26222
   InstallationDate = 2012-10-12T15:07:38Z
   InstanceID = 
DCIM:INSTALLED#304_C_Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
   IsEntity = true
   MajorVersion
   MinorVersion
   RevisionNumber
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = false
   VendorID
   VersionString = YSF3
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber
   Classifications = 10
   ComponentID = 26222
   ComponentType = FRMW
   DeviceID
   ElementName = Physical Disk 0:1:1
   FQDD = Disk.Bay.1:Enclosure.Internal.0-1:RAID.Integrated.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:26222
   InstallationDate = 2012-10-12T15:07:38Z
   InstanceID = 
DCIM:INSTALLED#304_C_Disk.Bay.1:Enclosure.Internal.0-1:RAID.Integrated.1-1
   IsEntity = true
   MajorVersion
   MinorVersion
   RevisionNumber
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = false
   VendorID
   VersionString = YSF3
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID = 26018
   ComponentType = FRMW
   DeviceID
   ElementName = BP12G+ 0:1
   FQDD = Enclosure.Internal.0-1:RAID.Integrated.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:26018
   InstallationDate = NA
   InstanceID = 
DCIM:PREVIOUS#308_C_Enclosure.Internal.0-1:RAID.Integrated.1-1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 0
   RevisionNumber = 0
   RevisionString
   Status = Available
   SubDeviceID
   SubVendorID
   Updateable = false
   VendorID
   VersionString = 1.00
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID = 26018
   ComponentType = FRMW
   DeviceID
   ElementName = BP12G+ 0:1
   FQDD = Enclosure.Internal.0-1:RAID.Integrated.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:26018
   InstallationDate = NA
   InstanceID = 
DCIM:CURRENT#308_C_Enclosure.Internal.0-1:RAID.Integrated.1-1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 0
   RevisionNumber = 0
   RevisionString
   Status = Available
   SubDeviceID
   SubVendorID
   Updateable = false
   VendorID
   VersionString = 1.00
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID = 26018
   ComponentType = FRMW
   DeviceID
   ElementName = BP12G+ 0:1
   FQDD = Enclosure.Internal.0-1:RAID.Integrated.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:26018
   InstallationDate = 2012-10-12T15:07:38Z
   InstanceID = 
DCIM:INSTALLED#308_C_Enclosure.Internal.0-1:RAID.Integrated.1-1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 0
   RevisionNumber = 0
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = false
   VendorID
   VersionString = 1.00
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 42
   Classifications = 10
   ComponentID = 28897
   ComponentType = APAC
   DeviceID
   ElementName = Lifecycle Controller 2, 1.0.8.42, A00
   FQDD = USC.Embedded.1:LC.Embedded.1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:28897
   InstallationDate = 2012-10-12T15:04:14Z
   InstanceID = DCIM:INSTALLED#802__USC.Embedded.1:LC.Embedded.1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 0
   RevisionNumber = 8
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 1.0.8.42
   impactsTPMmeasurements = false

DCIM_SoftwareIdentity
   BuildNumber
   Classifications = 10
   ComponentID = 25806
   ComponentType = APAC
   DeviceID
   ElementName = Enterprise UEFI Diagnostics, 4223A3, 4223.6
   FQDD = Diagnostics.Embedded.1:LC.Embedded.1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:25806
   InstallationDate = 2012-10-12T17:29:25Z
   InstanceID = DCIM:INSTALLED#802__Diagnostics.Embedded.1:LC.Embedded.1
   IsEntity = true
   MajorVersion
   MinorVersion
   RevisionNumber
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 4223A3
   impactsTPMmeasurements = false

DCIM_SoftwareIdentity
   BuildNumber = 3
   Classifications = 10
   ComponentID = 18981
   ComponentType = APAC
   DeviceID
   ElementName = OS Drivers Pack, 7.1.1.3, A00
   FQDD = DriverPack.Embedded.1:LC.Embedded.1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:18981
   InstallationDate = 2012-10-12T17:29:25Z
   InstanceID = DCIM:INSTALLED#802__DriverPack.Embedded.1:LC.Embedded.1
   IsEntity = true
   MajorVersion = 7
   MinorVersion = 1
   RevisionNumber = 1
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 7.1.1.3
   impactsTPMmeasurements = false

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID = 27763
   ComponentType = FRMW
   DeviceID
   ElementName = System CPLD
   FQDD = CPLD.Embedded.1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:firmware:27763
   InstallationDate = 2012-10-12T15:04:14Z
   InstanceID = DCIM:INSTALLED#803__CPLD.Embedded.1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 0
   RevisionNumber = 3
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = false
   VendorID
   VersionString = 1.0.3
   impactsTPMmeasurements = false

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID
   ComponentType = FRMW
   DeviceID = 165F
   ElementName = Broadcom Gigabit Ethernet BCM5720 - 84:8F:69:FE:4C:D1
   FQDD = NIC.Embedded.1-1-1
   IdentityInfoType = 
OrgID:ComponentType:VendorID:DeviceID:SubVendorID:SubDeviceID
   IdentityInfoValue = DCIM:firmware:14E4:165F:1028:04DC
   InstallationDate = NA
   InstanceID = DCIM:CURRENT#701__NIC.Embedded.1-1-1
   IsEntity = true
   MajorVersion = 7
   MinorVersion = 2
   RevisionNumber = 20
   RevisionString
   Status = Available
   SubDeviceID = 04DC
   SubVendorID = 1028
   Updateable = true
   VendorID = 14E4
   VersionString = 7.2.20
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID
   ComponentType = FRMW
   DeviceID = 165F
   ElementName = Broadcom Gigabit Ethernet BCM5720 - 84:8F:69:FE:4C:D1
   FQDD = NIC.Embedded.1-1-1
   IdentityInfoType = 
OrgID:ComponentType:VendorID:DeviceID:SubVendorID:SubDeviceID
   IdentityInfoValue = DCIM:firmware:14E4:165F:1028:04DC
   InstallationDate = 2012-10-12T15:25:58Z
   InstanceID = DCIM:INSTALLED#701__NIC.Embedded.1-1-1
   IsEntity = true
   MajorVersion = 7
   MinorVersion = 2
   RevisionNumber = 20
   RevisionString
   Status = Installed
   SubDeviceID = 04DC
   SubVendorID = 1028
   Updateable = true
   VendorID = 14E4
   VersionString = 7.2.20
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID
   ComponentType = FRMW
   DeviceID = 165F
   ElementName = Broadcom Gigabit Ethernet BCM5720 - 84:8F:69:FE:4C:D2
   FQDD = NIC.Embedded.2-1-1
   IdentityInfoType = 
OrgID:ComponentType:VendorID:DeviceID:SubVendorID:SubDeviceID
   IdentityInfoValue = DCIM:firmware:14E4:165F:1028:04DC
   InstallationDate = NA
   InstanceID = DCIM:CURRENT#701__NIC.Embedded.2-1-1
   IsEntity = true
   MajorVersion = 7
   MinorVersion = 2
   RevisionNumber = 20
   RevisionString
   Status = Available
   SubDeviceID = 04DC
   SubVendorID = 1028
   Updateable = true
   VendorID = 14E4
   VersionString = 7.2.20
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 10
   ComponentID
   ComponentType = FRMW
   DeviceID = 165F
   ElementName = Broadcom Gigabit Ethernet BCM5720 - 84:8F:69:FE:4C:D2
   FQDD = NIC.Embedded.2-1-1
   IdentityInfoType = 
OrgID:ComponentType:VendorID:DeviceID:SubVendorID:SubDeviceID
   IdentityInfoValue = DCIM:firmware:14E4:165F:1028:04DC
   InstallationDate = 2012-10-12T15:26:00Z
   InstanceID = DCIM:INSTALLED#701__NIC.Embedded.2-1-1
   IsEntity = true
   MajorVersion = 7
   MinorVersion = 2
   RevisionNumber = 20
   RevisionString
   Status = Installed
   SubDeviceID = 04DC
   SubVendorID = 1028
   Updateable = true
   VendorID = 14E4
   VersionString = 7.2.20
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 11
   ComponentID = 159
   ComponentType = BIOS
   DeviceID
   ElementName = BIOS
   FQDD = BIOS.Setup.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:BIOS:159
   InstallationDate = NA
   InstanceID = DCIM:PREVIOUS#741__BIOS.Setup.1-1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 3
   RevisionNumber = 5
   RevisionString
   Status = Available
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 1.3.5
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 11
   ComponentID = 159
   ComponentType = BIOS
   DeviceID
   ElementName = BIOS
   FQDD = BIOS.Setup.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:BIOS:159
   InstallationDate = NA
   InstanceID = DCIM:CURRENT#741__BIOS.Setup.1-1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 3
   RevisionNumber = 5
   RevisionString
   Status = Available
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 1.3.5
   impactsTPMmeasurements = true

DCIM_SoftwareIdentity
   BuildNumber = 0
   Classifications = 11
   ComponentID = 159
   ComponentType = BIOS
   DeviceID
   ElementName = BIOS
   FQDD = BIOS.Setup.1-1
   IdentityInfoType = OrgID:ComponentType:ComponentID
   IdentityInfoValue = DCIM:BIOS:159
   InstallationDate = 2012-10-12T15:25:57Z
   InstanceID = DCIM:INSTALLED#741__BIOS.Setup.1-1
   IsEntity = true
   MajorVersion = 1
   MinorVersion = 3
   RevisionNumber = 5
   RevisionString
   Status = Installed
   SubDeviceID
   SubVendorID
   Updateable = true
   VendorID
   VersionString = 1.3.5
   impactsTPMmeasurements = true

--> GetPhysicalDiskViews
Wed Nov 14 18:36:31 2012: GetPhysicalDiskViews
wsman enumerate 
"http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_PhysicalDiskView" 
-h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y 
basic

DCIM_PhysicalDiskView
   BusProtocol = 6
   Connector = 0
   DriveFormFactor = 2
   FQDD = Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
   FreeSizeInBytes = 0
   HotSpareStatus = 0
   InstanceID = Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
   LastSystemInventoryTime = 20121012171734.000000+000
   LastUpdateTime = 20121012153237.000000+000
   Manufacturer = SEAGATE
   ManufacturingDay = 1
   ManufacturingWeek = 21
   ManufacturingYear = 2012
   MaxCapableSpeed = 3
   MediaType = 0
   Model = ST9300453SS
   OperationName = None
   OperationPercentComplete = 0
   PPID = CN081N2C7262225Q000RA00
   PredictiveFailureState = 0
   PrimaryStatus = 0
   RaidStatus = 2
   Revision = YSF3
   RollupStatus = 0
   SASAddress = 5000C50053FBA821
   SecurityState = 0
   SerialNumber = 6XN12SW6
   SizeInBytes = 299439751168
   Slot = 0
   SupportedEncryptionTypes = Self Encrypting Drive
   UsedSizeInBytes = 299439751168

DCIM_PhysicalDiskView
   BusProtocol = 6
   Connector = 0
   DriveFormFactor = 2
   FQDD = Disk.Bay.1:Enclosure.Internal.0-1:RAID.Integrated.1-1
   FreeSizeInBytes = 0
   HotSpareStatus = 0
   InstanceID = Disk.Bay.1:Enclosure.Internal.0-1:RAID.Integrated.1-1
   LastSystemInventoryTime = 20121012171734.000000+000
   LastUpdateTime = 20121012153237.000000+000
   Manufacturer = SEAGATE
   ManufacturingDay = 1
   ManufacturingWeek = 21
   ManufacturingYear = 2012
   MaxCapableSpeed = 3
   MediaType = 0
   Model = ST9300453SS
   OperationName = None
   OperationPercentComplete = 0
   PPID = CN081N2C7262225Q0027A00
   PredictiveFailureState = 0
   PrimaryStatus = 0
   RaidStatus = 2
   Revision = YSF3
   RollupStatus = 0
   SASAddress = 5000C50053FB4AF1
   SecurityState = 0
   SerialNumber = 6XN13F0S
   SizeInBytes = 299439751168
   Slot = 1
   SupportedEncryptionTypes = Self Encrypting Drive
   UsedSizeInBytes = 299439751168

-->

 	martin

>
> Best regards,
> Ganesh Viswanathan
>
>
> -----Original Message-----
> From: linux-poweredge-bounces-Lists On Behalf Of Martin Flemming
> Sent: Wednesday, November 14, 2012 7:43 AM
> To: linux-poweredge-Lists
> Subject: Re: [Linux-PowerEdge] LC remote changing from raid1 to raid0
>
>
> Hi, Ganesh et all !
>
>
> On Fri, 9 Nov 2012, Ganesh_Viswanathan at Dell.com wrote:
>> Hello Martin,
>> This might be much easier using Recite available here: http://dell.to/recite-wsman.
>>
>> You can refer to the Best Practices guide for details on RAID creation. Section 4.1 has the methods to invoke. There are also sample Recite scripts that will help you get started.
>
> thanks for the hints ... but i'm not very successfully :-( Hopeing to get the right direction to get this running
>
> I'm starting with RAIDstacking_TIME_NOW.win from BestPracticeFlows-collection and "rewrite" it for RAID0 and only for two disks ..
>
> cat RAID-Stripe0-stacking_TIME_NOW.win|grep -v \^# ######################################################
> Set $swait 30
> Set $lwait 1800
> Set $FQDD RAID.Integrated.1-1
> Set $poll_reloading FALSE
> Set $poll_ready TRUE
> batch BestPracticeFlows/helpers/GetSystemStatus.win
> batch BestPracticeFlows/DisableCSIOR.win
> ResetConfig Target=$FQDD
> Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD PDArray=Disk.Bay.0:Enclosure.Internal.0-0:$FQDD PDArray=Disk.Bay.1:Enclosure.Internal.0-0:$FQDD VDPropValueArray=2 Find InstanceID $vd1 Until ReturnValue=4096 $swait $lwait CreateRAIDConfigJob Target=$FQDD ScheduledStartTime=TIME_NOW RebootJobType=3 Find InstanceID $jid Until JobStatus=Completed $swait $lwait GetLifecycleJob InstanceID=$jid Set $poll_reloading TRUE Set $poll_ready TRUE batch BestPracticeFlows/helpers/GetSystemStatus.win
> -GetVirtualDiskViews
> -GetPhysicalDiskViews
> ##############################################################
>
> but get finally  follow error messages "CreateVirtualDisk_OUTPUT Message = Physical disk not found"
>
> -> Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD
> -> PDArray=Disk.Bay.0:Enclosure.Internal.0-0
> -> PDArray=Disk.Bay.1:Enclosure.Internal.0-0 VDPropValueArray=2
> Wed Nov 14 14:16:29 2012: Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD PDArray=Disk.Bay.0:Enclosure.Internal.0-0 PDArray=Disk.Bay.1:Enclosure.Internal.0-0 VDPropValueArray=2 Wed Nov 14 14:16:29 2012: CreateVirtualDisk Target=RAID.Integrated.1-1 PDArray=Disk.Bay.0:Enclosure.Internal.0-0 PDArray=Disk.Bay.1:Enclosure.Internal.0-0 VDPropValueArray=2 wsman invoke -a CreateVirtualDisk "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_RAIDService,SystemName=DCIM:ComputerSystem,Name=DCIM:RAIDService"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic -J /tmp/tmpTxHkhU
>
> <p:CreateVirtualDisk_INPUT
> xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService">
>   <p:PDArray>Disk.Bay.0:Enclosure.Internal.0-0</p:PDArray>
>   <p:PDArray>Disk.Bay.1:Enclosure.Internal.0-0</p:PDArray>
>   <p:Target>RAID.Integrated.1-1</p:Target>
>   <p:VDPropNameArray>RAIDLevel</p:VDPropNameArray>
>   <p:VDPropNameArray>SpanLength</p:VDPropNameArray>
>   <p:VDPropValueArray>2</p:VDPropValueArray>
> </p:CreateVirtualDisk_INPUT>
>
> CreateVirtualDisk_OUTPUT
>   Message = Physical disk not found
>   MessageID = STOR029
>   ReturnValue = 2
>
>   Until: ReturnValue != 0  [['2']]
>
>
> What's going wrong ?! :-(
>
> Any Help is welcome ! :-)
>
>
> Thanks in Advance
>
>                     martin
>
>
> Below all steps till the error message :
>
>
> python recite.py IP=root:calvin at IP_HOST
>
> GetVirtualDiskViews
>
> CIM_VirtualDiskView
>   BusProtocol = 6
>   Cachecade = 0
>   DiskCachePolicy = 1024
>   FQDD = Disk.Virtual.0:RAID.Integrated.1-1
>   InstanceID = Disk.Virtual.0:RAID.Integrated.1-1
>   LastSystemInventoryTime = 20121113223602.000000+000
>   LastUpdateTime = 20121113223602.000000+000
>   LockStatus = 0
>   MediaType = 1
>   Name = Virtual Disk 00
>   ObjectStatus = 0
>   OperationName = None
>   OperationPercentComplete = 0
>   PhysicalDiskIDs = Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
>   PhysicalDiskIDs = Disk.Bay.1:Enclosure.Internal.0-1:RAID.Integrated.1-1
>   PrimaryStatus = 1
>   RAIDStatus = 2
>   RAIDTypes = 2
>   ReadCachePolicy = 16
>   RemainingRedundancy = 0
>   RollupStatus = 1
>   SizeInBytes = 598879502336
>   SpanDepth = 1
>   SpanLength = 2
>   StartingLBAinBlocks = 0
>   StripeSize = 128
>   VirtualDiskTargetID = 0
>   WriteCachePolicy = 1
>
>
>
>
> --> Set $FQDD RAID.Integrated.1-1
> Wed Nov 14 14:11:57 2012: Set $FQDD RAID.Integrated.1-1
> --> batch BestPracticeFlows/helpers/GetSystemStatus.win
> Wed Nov 14 14:12:07 2012: batch
> BestPracticeFlows/helpers/GetSystemStatus.win
> Wed Nov 14 14:12:07 2012: Set $swait 30
> Wed Nov 14 14:12:07 2012: Set $lwait 1800 Wed Nov 14 14:12:07 2012: GetSystemViews wsman enumerate "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_SystemView"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic
>
> DCIM_SystemView
>   AssetTag
>   BIOSReleaseDate = 08/21/2012
>   BIOSVersionString = 1.3.5
>   BaseBoardChassisSlot = Slot 07
>   BatteryRollupStatus = 1
>   BladeGeometry = 0
>   BoardPartNumber = 0W8TY0A01
>   BoardSerialNumber = CN70163278002O
>   CMCIP = 10.13.58.134
>   CPLDVersion = 1.0.3
>   CPURollupStatus = 1
>   ChassisName = Server Blade
>   ChassisServiceTag = 7FB645J
>   ChassisSystemHeight
>   ExpressServiceCode = 34271419015
>   FQDD = System.Embedded.1
>   FanRollupStatus = 0
>   HostName
>   InstanceID = System.Embedded.1
>   LastSystemInventoryTime = 20121012171734.000000+000
>   LastUpdateTime = 20121012152509.000000+000
>   LicensingRollupStatus = 1
>   LifecycleControllerVersion = 2.0.0
>   Manufacturer = Dell Inc.
>   MaxCPUSockets = 2
>   MaxDIMMSlots = 12
>   MaxPCIeSlots = 0
>   MemoryOperationMode = Unknown
>   Model = PowerEdge M520
>   PSRollupStatus = 0
>   PlatformGUID = 4a35474f-c0c6-4280-5310-00514c4c4544
>   PopulatedCPUSockets = 2
>   PopulatedDIMMSlots = 6
>   PopulatedPCIeSlots = 0
>   PowerCap = 296
>   PowerCapEnabledState = 3
>   PowerState = 8
>   PrimaryStatus = 0
>   RollupStatus = 1
>   ServerAllocation = 0
>   ServiceTag = FQSBG5J
>   StorageRollupStatus = 1
>   SysMemErrorMethodology = 6
>   SysMemFailOverState = NotInUse
>   SysMemLocation = 3
>   SysMemPrimaryStatus = 1
>   SysMemTotalSize = 49152
>   SystemGeneration = 12G Modular
>   SystemID = 1244
>   SystemRevision = 0
>   TempRollupStatus = 1
>   UUID = 4c4c4544-0051-5310-8042-c6c04f47354a
>   VoltRollupStatus = 1
>   smbiosGUID = 44454c4c-5100-1053-8042-c6c04f47354a
>
> Wed Nov 14 14:12:12 2012: Find LifecycleControllerVersion $lc_version Wed Nov 14 14:12:12 2012: if $lc_version=1.5.1 >GETRSSTATUS Wed Nov 14 14:12:12 2012: if $lc_version=2.0.0 >GETREMOTESERVICEAPISTATUS Wed Nov 14 14:12:12 2012: Goto GETREMOTESERVICEAPISTATUS Wed Nov 14 14:12:12 2012: Until Message="Lifecycle Controller Remote Services is ready." 20 1800 GetRemoteServicesAPIStatus Wed Nov 14 14:12:12 2012: GetRemoteServicesAPIStatus wsman invoke -a GetRemoteServicesAPIStatus "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_LCService?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_LCService,SystemName=DCIM:ComputerSystem,Name=DCIM:LCService"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic
>
> GetRemoteServicesAPIStatus_OUTPUT
>   LCStatus = 0
>   Message = Lifecycle Controller Remote Services is ready.
>   MessageID = LC061
>   ReturnValue = 0
>   ServerStatus = 0
>   Status = 0
>
> Wed Nov 14 14:12:14 2012: Set $LCrev 2.0.0
> --> batch BestPracticeFlows/DisableCSIOR.win
> Wed Nov 14 14:12:23 2012: batch BestPracticeFlows/DisableCSIOR.win
> Wed Nov 14 14:12:23 2012: Set $poll_reloading FALSE Wed Nov 14 14:12:23 2012: Set $poll_ready TRUE Wed Nov 14 14:12:23 2012: batch BestPracticeFlows/helpers/GetSystemStatus.win
> Wed Nov 14 14:12:23 2012: Set $swait 30
> Wed Nov 14 14:12:23 2012: Set $lwait 1800 Wed Nov 14 14:12:23 2012: GetSystemViews wsman enumerate "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_SystemView"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic
>
> DCIM_SystemView
>   AssetTag
>   BIOSReleaseDate = 08/21/2012
>   BIOSVersionString = 1.3.5
>   BaseBoardChassisSlot = Slot 07
>   BatteryRollupStatus = 1
>   BladeGeometry = 0
>   BoardPartNumber = 0W8TY0A01
>   BoardSerialNumber = CN70163278002O
>   CMCIP = 10.13.58.134
>   CPLDVersion = 1.0.3
>   CPURollupStatus = 1
>   ChassisName = Server Blade
>   ChassisServiceTag = 7FB645J
>   ChassisSystemHeight
>   ExpressServiceCode = 34271419015
>   FQDD = System.Embedded.1
>   FanRollupStatus = 0
>   HostName
>   InstanceID = System.Embedded.1
>   LastSystemInventoryTime = 20121012171734.000000+000
>   LastUpdateTime = 20121012152509.000000+000
>   LicensingRollupStatus = 1
>   LifecycleControllerVersion = 2.0.0
>   Manufacturer = Dell Inc.
>   MaxCPUSockets = 2
>   MaxDIMMSlots = 12
>   MaxPCIeSlots = 0
>   MemoryOperationMode = Unknown
>   Model = PowerEdge M520
>   PSRollupStatus = 0
>   PlatformGUID = 4a35474f-c0c6-4280-5310-00514c4c4544
>   PopulatedCPUSockets = 2
>   PopulatedDIMMSlots = 6
>   PopulatedPCIeSlots = 0
>   PowerCap = 296
>   PowerCapEnabledState = 3
>   PowerState = 8
>   PrimaryStatus = 0
>   RollupStatus = 1
>   ServerAllocation = 0
>   ServiceTag = FQSBG5J
>   StorageRollupStatus = 1
>   SysMemErrorMethodology = 6
>   SysMemFailOverState = NotInUse
>   SysMemLocation = 3
>   SysMemPrimaryStatus = 1
>   SysMemTotalSize = 49152
>   SystemGeneration = 12G Modular
>   SystemID = 1244
>   SystemRevision = 0
>   TempRollupStatus = 1
>   UUID = 4c4c4544-0051-5310-8042-c6c04f47354a
>   VoltRollupStatus = 1
>   smbiosGUID = 44454c4c-5100-1053-8042-c6c04f47354a
>
> Wed Nov 14 14:12:27 2012: Find LifecycleControllerVersion $lc_version Wed Nov 14 14:12:27 2012: if $lc_version=1.5.1 >GETRSSTATUS Wed Nov 14 14:12:27 2012: if $lc_version=2.0.0 >GETREMOTESERVICEAPISTATUS Wed Nov 14 14:12:27 2012: Goto GETREMOTESERVICEAPISTATUS Wed Nov 14 14:12:27 2012: Until Message="Lifecycle Controller Remote Services is ready." 20 1800 GetRemoteServicesAPIStatus Wed Nov 14 14:12:27 2012: GetRemoteServicesAPIStatus wsman invoke -a GetRemoteServicesAPIStatus "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_LCService?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_LCService,SystemName=DCIM:ComputerSystem,Name=DCIM:LCService"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic
>
> GetRemoteServicesAPIStatus_OUTPUT
>   LCStatus = 0
>   Message = Lifecycle Controller Remote Services is ready.
>   MessageID = LC061
>   ReturnValue = 0
>   ServerStatus = 0
>   Status = 0
>
> Wed Nov 14 14:12:29 2012: Set $LCrev 2.0.0 Wed Nov 14 14:12:29 2012: GetLCEnumerations wsman enumerate "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_LCEnumeration"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic
>
> DCIM_LCEnumeration
>   AttributeName = Collect System Inventory on Restart
>   CurrentValue = Disabled
>   DefaultValue = Enabled
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#CollectSystemInventoryOnRestart
>   IsReadOnly = false
>   PendingValue
>   PossibleValues = Enabled
>   PossibleValues = Disabled
>
> DCIM_LCEnumeration
>   AttributeName = Part Configuration Update
>   CurrentValue = Disabled
>   DefaultValue = Disabled
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#PartConfigurationUpdate
>   IsReadOnly = false
>   PendingValue
>   PossibleValues = Disabled
>   PossibleValues = Apply always
>   PossibleValues = Apply only if firmware match
>
> DCIM_LCEnumeration
>   AttributeName = Part Firmware Update
>   CurrentValue = Disable
>   DefaultValue = Disable
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#PartFirmwareUpdate
>   IsReadOnly = false
>   PendingValue
>   PossibleValues = Disable
>   PossibleValues = Allow version upgrade only
>   PossibleValues = Match firmware of replaced part
>
> DCIM_LCEnumeration
>   AttributeName = Lifecycle Controller State
>   CurrentValue = Enabled
>   DefaultValue = Enabled
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#LifecycleControllerState
>   IsReadOnly = false
>   PendingValue
>   PossibleValues = Enabled
>   PossibleValues = Disabled
>   PossibleValues = Recovery
>
> DCIM_LCEnumeration
>   AttributeName = Licensed
>   CurrentValue = Yes
>   DefaultValue = No
>   ElementName = LC.emb.1
>   InstanceID = LifecycleController.Embedded.1#LCAttributes.1#Licensed
>   IsReadOnly = true
>   PendingValue
>   PossibleValues = No
>   PossibleValues = Yes
>
> DCIM_LCEnumeration
>   AttributeName = Auto Discovery
>   CurrentValue = Off
>   DefaultValue = Off
>   ElementName = LC.emb.1
>   InstanceID = LifecycleController.Embedded.1#LCAttributes.1#AutoDiscovery
>   IsReadOnly = true
>   PendingValue
>   PossibleValues = On
>   PossibleValues = Off
>
> DCIM_LCEnumeration
>   AttributeName = Discovery Factory Defaults
>   CurrentValue = Off
>   DefaultValue = Off
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#DiscoveryFactoryDefaults
>   IsReadOnly = true
>   PendingValue
>   PossibleValues = On
>   PossibleValues = Off
>
> DCIM_LCEnumeration
>   AttributeName = IPChangeNotifyPS
>   CurrentValue = Off
>   DefaultValue = Off
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#IPChangeNotifyPS
>   IsReadOnly = false
>   PendingValue
>   PossibleValues = On
>   PossibleValues = Off
>
> DCIM_LCEnumeration
>   AttributeName = VirtualAddressManagement
>   CurrentValue = FlexAddress
>   DefaultValue = FlexAddress
>   ElementName = LC.emb.1
>   InstanceID =
> LifecycleController.Embedded.1#LCAttributes.1#VirtualAddressManagement
>   IsReadOnly = false
>   PendingValue
>   PossibleValues = FlexAddress
>   PossibleValues = Console
>
> Wed Nov 14 14:12:45 2012: Context AttributeName="Collect System Inventory on Restart" Find CurrentValue $current_csior_value Wed Nov 14 14:12:45 2012: Find CurrentValue $current_csior_value Wed Nov 14 14:12:45 2012: If Disabled=$current_csior_value Goto END Wed Nov 14 14:12:45 2012: Goto END
> --> ResetConfig Target=$FQDD
> Wed Nov 14 14:15:51 2012: ResetConfig Target=$FQDD wsman invoke -a ResetConfig "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_RAIDService,SystemName=DCIM:ComputerSystem,Name=DCIM:RAIDService"
> -k "Target=RAID.Integrated.1-1" -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic
>
> ResetConfig_OUTPUT
>   RebootRequired = YES
>   ReturnValue = 0
>
> --> Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD
> PDArray=Disk.Bay.0:Enclosure.Internal.0-0:$FQDD
> PDArray=Disk.Bay.1:Enclosure.Internal.0-0:$FQDD VDPropValueArray=2 Wed Nov 14 14:16:15 2012: Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD PDArray=Disk.Bay.0:Enclosure.Internal.0-0:$FQDD
> PDArray=Disk.Bay.1:Enclosure.Internal.0-0:$FQDD VDPropValueArray=2 Wed Nov 14 14:16:15 2012: CreateVirtualDisk Target=RAID.Integrated.1-1
> PDArray=Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1
> PDArray=Disk.Bay.1:Enclosure.Internal.0-0:RAID.Integrated.1-1
> VDPropValueArray=2
> wsman invoke -a CreateVirtualDisk
> "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_RAIDService,SystemName=DCIM:ComputerSystem,Name=DCIM:RAIDService"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic -J /tmp/tmpiAcJZi
>
> <p:CreateVirtualDisk_INPUT
> xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService">
>
> <p:PDArray>Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1</p:PDArray>
>
> <p:PDArray>Disk.Bay.1:Enclosure.Internal.0-0:RAID.Integrated.1-1</p:PDArray>
>   <p:Target>RAID.Integrated.1-1</p:Target>
>   <p:VDPropNameArray>RAIDLevel</p:VDPropNameArray>
>   <p:VDPropNameArray>SpanLength</p:VDPropNameArray>
>   <p:VDPropValueArray>2</p:VDPropValueArray>
> </p:CreateVirtualDisk_INPUT>
>
> CreateVirtualDisk_OUTPUT
>   Message = Physical disk not found
>   MessageID = STOR029
>   ReturnValue = 2
>
>   Until: ReturnValue != 0  [['2']]
>
> ^CDeleting /tmp/tmpiAcJZi
> Set $IP root:******@10.13.58.189
> --> Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD
> PDArray=Disk.Bay.0:Enclosure.Internal.0-0
> PDArray=Disk.Bay.1:Enclosure.Internal.0-0 VDPropValueArray=2 Wed Nov 14 14:16:29 2012: Until ReturnValue=0 $swait $lwait CreateVirtualDisk Target=$FQDD PDArray=Disk.Bay.0:Enclosure.Internal.0-0
> PDArray=Disk.Bay.1:Enclosure.Internal.0-0 VDPropValueArray=2 Wed Nov 14 14:16:29 2012: CreateVirtualDisk Target=RAID.Integrated.1-1
> PDArray=Disk.Bay.0:Enclosure.Internal.0-0
> PDArray=Disk.Bay.1:Enclosure.Internal.0-0 VDPropValueArray=2 wsman invoke -a CreateVirtualDisk "http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_RAIDService,SystemName=DCIM:ComputerSystem,Name=DCIM:RAIDService"
> -h 10.13.58.189 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic -J /tmp/tmpTxHkhU
>
> <p:CreateVirtualDisk_INPUT
> xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDService">
>   <p:PDArray>Disk.Bay.0:Enclosure.Internal.0-0</p:PDArray>
>   <p:PDArray>Disk.Bay.1:Enclosure.Internal.0-0</p:PDArray>
>   <p:Target>RAID.Integrated.1-1</p:Target>
>   <p:VDPropNameArray>RAIDLevel</p:VDPropNameArray>
>   <p:VDPropNameArray>SpanLength</p:VDPropNameArray>
>   <p:VDPropValueArray>2</p:VDPropValueArray>
> </p:CreateVirtualDisk_INPUT>
>
> CreateVirtualDisk_OUTPUT
>   Message = Physical disk not found
>   MessageID = STOR029
>   ReturnValue = 2
>
>   Until: ReturnValue != 0  [['2']]
>
>
>
>
>
>
>>
>> LC on TechCenter:
>> http://en.community.dell.com/techcenter/systems-management/w/wiki/1979
>> .lifecycle-controller.aspx BP guide:
>> http://en.community.dell.com/techcenter/extras/m/white_papers/20066173
>> .aspx BP script samples:
>> http://en.community.dell.com/techcenter/extras/m/white_papers/20066178
>> .aspx
>>
>> Also, do check out the RAID profile document which goes into all the RAID capabilities of Lifecycle Controller.
>>
>> Profiles:
>> http://en.community.dell.com/techcenter/systems-management/w/wiki/1906
>> .dcim-library-profile.aspx RAID profile:
>> http://en.community.dell.com/techcenter/systems-management/w/wiki/3527
>> .dcim-raid-profile-1-2.aspx
>>
>> Hope this helps.
>>
>> Best regards,
>> Ganesh Viswanathan
>>
>>
>> -----Original Message-----
>> From: linux-poweredge-bounces-Lists On Behalf Of
>> martin.flemming at desy.de
>> Sent: Friday, November 09, 2012 3:37 AM
>> To: linux-poweredge-Lists
>> Subject: [Linux-PowerEdge] LC remote changing from raid1 to raid0
>>
>>
>> Hi !
>>
>> I've got 50 M520 server which are delivered with raid1, but we want to change the raid-configuration to raid0 because they are only batch-machines an we need fast scratch ...
>>
>> So what's the best practise to change the raid-configuration remotely ?
>>
>> .. thinking it's the way with  the LifeCyclecontroller, isn't it ?
>>
>>
>> I've found the wiki-side
>>
>> http://en.community.dell.com/techcenter/systems-management/w/wiki/1981
>> .scripting-the-dell-lifecycle-controller.aspx
>>
>>
>> My first try was to use
>>
>> RAID Attributes push pull     Python and Shell scripts to inventory
>> (pull) and configure (push) RAID attributes using WSMan.
>>
>> wsmanclipy, sh
>>
>>
>> flemming@:/scratch/flemming/lc2/raid $ ./pullRAID.sh IP address (ENTER
>> for default: ) ? XXXXXX User name (ENTER for default: ) ? XXXXX User
>> password (ENTER for default: ) ? XXXX
>>
>>  Building the Order Attributes Template File...
>>
>>  Getting the Attributes ....
>> pullraid.py:197: DeprecationWarning: os.popen3 is deprecated.  Use the subprocess module.
>>   (fin, fout, ferr) = os.popen3(command, "t")  Creating the .ini file
>> ....
>> Traceback (most recent call last):
>>   File "pullraid.py", line 244, in <module>
>>     CNARunner(idracIp, idracUser, idracPass, attrSet)
>>   File "pullraid.py", line 54, in __init__
>>     self.run()
>>   File "pullraid.py", line 90, in run
>>     self.buildIni(self.idracIp, self.settings, orderAttr)
>>   File "pullraid.py", line 137, in buildIni
>>     if vallist[j].hasChildNodes() == True:
>> IndexError: list index out of range
>> flemming at ip-console3:/scratch/flemming/lc2/raid $
>>
>> ...  what means the error-messages above ?
>>
>>
>> I've got these files
>> XXXX_raid.ini
>> XXXX_raid.log
>> XXXX_raidorder.xml
>>
>> .. thinking that i can't change my raid-configuration with these scripts, can i ?
>>
>>
>> After that i switch to the scriptcollection
>> linux_lc1_5_scripts_2011_09_8_v1_2.zip
>>
>> .. specialy
>>
>> 16_RAID_Storage_Management
>>
>> ... got somebody an quick advice, how i delete my virtual disk(raid1) an create a new one with raid0 ?
>>
>> thanks & cheers
>>
>>        Martin
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>



More information about the Linux-PowerEdge mailing list