[Linux-PowerEdge] R610 Server bricked after firmware update
heskin at gmail.com
Thu Nov 8 13:03:07 CST 2012
Yes. The PERC firmware was upgrade to: 6.3.1-0003 and the BIOS
upgraded to: 6.3.0
These are the versions that are displayed upon boot up.
They were upgraded from PERC 6.2.0-0013 and BIOS 1.3.6
On Thu, Nov 8, 2012 at 1:45 PM, Sabuj Pattanayek <sabujp at gmail.com> wrote:
> n Thu, Nov 8, 2012 at 12:44 PM, Sabuj Pattanayek <sabujp at gmail.com> wrote:
>> Do you remember which firmware and bios version you upgraded to?
> PERC firmware that is
>> On Thu, Nov 8, 2012 at 12:31 PM, Hank <heskin at gmail.com> wrote:
>>> Anyone have any ideas on this? Will I need to call Dell Support?
>>> I found one post that talked about the backplane firmware needed to be
>>> upgraded (see: http://communities.intel.com/thread/7044 ) but since I
>>> can't remove the drives remotely (if that will even clear the error)
>>> and I can't boot the machine to any alternative media, I'm not sure
>>> what other options I have.
>>> On Tue, Nov 6, 2012 at 8:07 PM, Hank <heskin at gmail.com> wrote:
>>>> I've been updating the firmware on my R610s.
>>>> I just updated the second server. It has current BIOS and PERC
>>>> firmware. This server worked perfectly before the update. Now upon
>>>> boot up, I get the following message:
>>>> : "Number of devices exceeded the maximum limit of devices per quad.
>>>> Please remove the extra drives and reboot the system to avoid losing
>>>> data. System has halted due to unsupported configuration."
>>>> I'm unable to start up the PERC config (ctrl-R), or F2 system config,
>>>> or even boot to USC (F10) or vIrtual CD (boot options F11). The
>>>> system says "System has been halted due to unsupported configuration".
>>>> What was supported before, and now after a firmware update, not
>>>> supported? I now have a remote server that is totally briked.
>>> Linux-PowerEdge mailing list
>>> Linux-PowerEdge at dell.com
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
More information about the Linux-PowerEdge