OMSA problem on ESXi
dyioulos at onpointfc.com
Wed Jul 18 10:02:06 CDT 2012
Ah, when I run the command thusly:
"esxcli --server=192.168.100.63 --username=root --password=blahblah software vib
list | grep -i openmanage"
it works. And returns nothing. So, I guess I'll try installing OMSA 7 next.
Will report back my results.
On Wednesday 18 July 2012 10:40:26 am Dimitri Yioulos wrote:
> Thanks, Krishnaprasad. I did upgrade from 4.x to 5.0. I'm running the
> following from the vSphere CLI on my desktop:
> "esxcli --server 192.168.100.63 software vib list | grep -i openmanage"
> and it's been running for about 20 minutes without providing any output or
> returning to a prompt. Does that seem right? I can't imagine that grep
> has to traverse to many directories and files that it would take this long.
> But, I could be wrong on that.
> On Wednesday 18 July 2012 10:18:20 am Krishnaprasad_K at dell.com wrote:
> > Hi, What was the previous version of ESXi you were using? If you had
> > upgraded from ESX/ESXi 4.x to ESXi 5.0, then OM 6.5 for 4.x would have
> > automatically removed during upgrade due to incompatibility. If the
> > command 'esxcli software vib list | grep -i openmanage' returns nothing,
> > you need to install OM 7.0 for ESXi
> > 5.0<http://www.dell.com/support/drivers/us/en/555/DriverDetails?DriverId=
> >7R TV2> OR OM 6.5 for ESXi
> > 5.0<http://www.dell.com/support/drivers/us/en/g_5/DriverDetails/DriverFil
> >eF ormats?DriverId=N3R0H>.
> > Thanks,
> > Krishnaprasad
> > -----Original Message-----
> > From: linux-poweredge-bounces-Lists On Behalf Of Dimitri Yioulos
> > Sent: Wednesday, July 18, 2012 6:14 PM
> > To: linux-poweredge-Lists
> > Subject: OMSA problem on ESXi
> > Hello to all.
> > I currently have three boxes on which I recently upgraded to ESXi 5.
> > Previously, I had installed OMSA 6.5 on these machines, and can no longer
> > access OMSA via the Web client. I keep getting "Login failed... Internal
> > Error" on each box. I've searched for a solution, but haven't come up
> > with anything that's worked. From what I've read, OMSA 6.5 should work
> > in ESXi 5. Can anyone suggest a solution? Upgrade to OMSA 7.1? If
> > upgrading is the case, then how do I do it? I used the vihostupdate
> > command in vMA when I installed 6.5.
> > Thanks!
> > Dimitri
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> > _______________________________________________
> > Linux-PowerEdge mailing list
> > Linux-PowerEdge at dell.com
> > https://lists.us.dell.com/mailman/listinfo/linux-poweredge
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the Linux-PowerEdge