Good idea? Dell MD1000 with 3TB SAS drives using a PERC 6/e controller to attach to a PowerEdge R905.

Diederick Stoffers d.stoffers at gmail.com
Wed Jul 11 10:24:14 CDT 2012


Do I need interposers if I only put SAS drives in there? I was under the impression this was not needed for a SAS only configuration. 

On 11 Jul 2012, at 17:10, Steve Thompson wrote:

> On Wed, 11 Jul 2012, Diederick Stoffers wrote:
> 
>> We have a PowerEdge R905 and are running out of disk space. I can get a great deal on a refurbished PowerVault MD1000 with a Dell PERC 6/e RAID controller, no disks. Can anyone comment on putting Enterprise grade Seagate Constellation 3TB SAS disks in RAID6 mode in this direct attached storage solution?
> 
> I don't know about the 2TB vs 3TB question, but be sure that you use interposers with these drives, even if the shelf is not in split bus mode. Very flaky behavior otherwise, probably due to marginal signal strengths.
> 
> Steve



More information about the Linux-PowerEdge mailing list