PE-T620/RHEL6x: why does OMSA report "warning icon" for battery?
jbaird at follett.com
Tue Jul 10 12:29:34 CDT 2012
There are virtually zero docs for any of this stuff. Unfortunately.
From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Giulio
Sent: Tuesday, July 10, 2012 3:09 AM
To: linux-poweredge at dell.com
Subject: Re: PE-T620/RHEL6x: why does OMSA report "warning icon" for battery?
On Mon, Jul 9, 2012 at 8:24 PM, Giulio <giulioo at gmail.com> wrote:
> PE-T620, BIOS: 1.2.6, CENTOS 6.x 2.6.32-220.23.1.el6.x86_64
> On the main OMSA web page
> Health -> Components -> Storage
> I get a warning icon (yellow triangle with black esclamation mark on top)
> for "Storage".
The warning icon went away after about 12 hours (server was new from factory).
> $ sudo omreport storage battery
> List of Batteries in the System
> Controller PERC H710P Adapter (Slot 4)
> ID : 0
> Status : Non-Critical <====
> Name : Battery 0
> State : Ready
> Recharge Count : Not Applicable
> Max Recharge Count : Not Applicable
> Predicted Capacity Status : Unknown
> Learn State : Not Applicable
> Next Learn Time : Not Applicable
> Maximum Learn Delay : Not Applicable
Now it reads:
List of Batteries in the System
Controller PERC H710P Adapter (Slot 4)
ID : 0
Status : Ok
Name : Battery 0
State : Ready
Recharge Count : Not Applicable
Max Recharge Count : Not Applicable
Predicted Capacity Status : Ready
Learn State : Not Applicable
Next Learn Time : Not Applicable
Maximum Learn Delay : Not Applicable
Clearer docs would be welcome.
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
More information about the Linux-PowerEdge