Dell M610 & iDRAC 3.21 not updated

Heijmans S (spir-it) Heijmans at rechtspraak.nl
Wed Sep 28 07:35:33 CDT 2011


Hello,

We have one Dell M610 left which doesn't want to update the iDRAC to v3.21.
Already rebooted the server and also tried inventory_firmware_gui with no success.
firmware_update gives the following;

[ ~]# update_firmware --yes

Running system inventory...

Searching storage directory for available BIOS updates...
Checking BIOS - 3.0.0
        Available: dell_dup_componentid_00159 - 3.0.0
        Did not find a newer package to install that meets all installation checks.
Checking SAS/SATA Backplane 0:0 Backplane Firmware - 1.07
        Available: dell_dup_componentid_11204 - 1.07
        Did not find a newer package to install that meets all installation checks.
Checking MBF2300RC Firmware - da06
        Available: dell_dup_componentid_24217 - da06
        Did not find a newer package to install that meets all installation checks.
Checking NetXtreme II BCM5709S Gigabit Ethernet rev 20 (eth1) - 6.2.14
        Available: pci_firmware(ven_0x14e4_dev_0x163a) - 6.2.14
        Did not find a newer package to install that meets all installation checks.
Checking NetXtreme II BCM5709S Gigabit Ethernet rev 20 (eth0) - 6.2.14
        Available: pci_firmware(ven_0x14e4_dev_0x163a) - 6.2.14
        Did not find a newer package to install that meets all installation checks.
Checking iDRAC - 3.20
        Available: dell_dup_componentid_15051 - 3.21
        Found Update: dell_dup_componentid_15051 - 3.21
Checking NetXtreme II BCM5709S Gigabit Ethernet rev 20 (eth3) - 6.2.14
        Available: pci_firmware(ven_0x14e4_dev_0x163a) - 6.2.14
        Did not find a newer package to install that meets all installation checks.
Checking NetXtreme II BCM5709S Gigabit Ethernet rev 20 (eth2) - 6.2.14
        Available: pci_firmware(ven_0x14e4_dev_0x163a) - 6.2.14
        Did not find a newer package to install that meets all installation checks.
Checking System BIOS for PowerEdge M610 - 3.0.0
        Did not find a newer package to install that meets all installation checks.
Checking PERC H700 Modular Controller 0 Firmware - 12.10.1-0001
        Available: pci_firmware(ven_0x1000_dev_0x0079_subven_0x1028_subdev_0x1f18) - 12.10.1-0001
        Did not find a newer package to install that meets all installation checks.

Found firmware which needs to be updated.

Running updates...
|       Installing dell_dup_componentid_15051 - 3.21Installation failed for package: dell_dup_componentid_15051 - 3.21
aborting update...

The error message from the low-level command was:

No Devices Found
[ ~]#

Regards,
Stefan Heijmans

Informatie van de Raad voor de rechtspraak, de rechtbanken, de gerechtshoven en de bijzondere colleges vindt u op www.rechtspraak.nl.



More information about the Linux-PowerEdge mailing list