R410 BMC firmware 1.54 and check_openmanage nagios plugin

Trond Hasle Amundsen t.h.amundsen at usit.uio.no
Wed Feb 9 04:27:58 CST 2011


Karsten Suehring <suehringlists at googlemail.com> writes:

> Hi Trond,
>
> I have just upgraded to OMSA 6.4 and check_openmanage 3.6.4. It seems
> the problem has returned and I'm getting again the message
>
> Amperage probe 0 [System Board System Level] reads 0 W
>
> The snmpwalk output looks still the same:
>
> Cannot find module (LM-SENSORS-MIB): At line 0 in (none)
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.1.1.1 = INTEGER: 1
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.2.1.1 = INTEGER: 1
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.3.1.1 = INTEGER: 0
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.4.1.1 = INTEGER: 1
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.5.1.1 = INTEGER: 2
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.7.1.1 = INTEGER: 26
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.8.1.1 = STRING: "System
> Board System Level"
> SNMPv2-SMI::enterprises.674.10892.1.600.30.1.15.1.1 = INTEGER: 0
>
> So this looks like a regression in check_openmanage? Could you please
> have a look at it?

Hi Karsten,

You're right. This is a regression bug in the plugin, for the special
corner case where OMSA is "misbehaving" via SNMP for R410s with newer
BMC firmware and one PSU.

Please try the version available here:

  http://folk.uio.no/trondham/software/beta/check_openmanage-3.6.5

Cheers,
-- 
Trond H. Amundsen <t.h.amundsen at usit.uio.no>
Center for Information Technology Services, University of Oslo



More information about the Linux-PowerEdge mailing list