Issues with OpenManage + CentOs 5.4

Paul M. Dyer pmdyer at ctgcentral2.com
Fri Sep 24 10:33:40 CDT 2010


Hi,

The correct protection mask for /tmp is 1777

> ls -al /tmp
total 132
drwxrwxrwt. 13 root   root    4096 2010-09-24 04:17 .

Paul


----- Original Message -----
From: "Chris Szilagyi" <chris at apex-internet.com>
To: "José Mª Martínez G." <jmmartinezg at etics.es>
Cc: linux-poweredge at dell.com
Sent: Friday, September 17, 2010 1:29:02 PM
Subject: Re: Issues with OpenManage + CentOs 5.4

Hi and thanks for the response.

> Which uid is running the process, root?

Yes, I am starting the services as root. The process never starts
though, because of the error.

>
> If user is different from root, maybe the message:
>
> "Unable to create temporary files."
>
> is because it tries to overwrite an existing files and the process "is
> not to authorizer to overwrite then"
>

Permissions are 0777 (write for all), on /tmp.

>
> Another suggestion, remove all the content from /tmp and try to
> reboot... or better (good practice) create /tmp in another partition
> different from / partition
>

I have tried removing everything from /tmp, and still the same error. I
have not tried putting /tmp in another partition yet.

Thanks for the help so far...


>
> Al 17/09/10 15:38, En/na Chris Szilagyi ha escrit:
>> Hello:
>>
>> /tmp is just on the default root filesystem (/) on this server, and
>> it has
>> plenty free:
>>
>> Filesystem Inodes IUsed IFree IUse% Mounted on
>> /dev/sda2 3074176 136227 2937949 5% /
>>
>> It's the EXT3 filesystem, if that makes any difference. Please let me
>> know if there are any other suggestions you can think of.
>>
>> Thank you for the help!
>>
>>
>>
>>> Check available inodes. df -i
>>>
>>> On Thu, Sep 16, 2010 at 10:29 PM, Chris Szilagyi
>>> <chris at apex-internet.com>wrote:
>>>
>>>
>>>> Hello:
>>>>
>>>> I recently set up a PowerEdge 2400 server running CentOS 5.4. I'm
>>>> trying to
>>>> get OpenManage 4.5 installed (last version that I could find, that
>>>> supports the PowerEdge 2400). I installed everything using the
>>>> supplied scripts,
>>>> however when I try to start the services with "srvadmin-services.sh
>>>> start",
>>>> I get the following:
>>>>
>>>> Starting Systems Management Device Drivers:
>>>> Starting dcdbas device driver: [ OK ]
>>>> Starting Systems Management Data Engine:
>>>> Starting dcstor32d: [ OK ]
>>>> Starting dcevt32d: [ OK ]
>>>> Starting OM Common Services: [ OK ]
>>>> invcol Error: extract(): Unable to create temporary files. Please
>>>> ensure that there is enough space in the
>>>> tmp folder.
>>>> Starting Secure Port Server: [ OK ]
>>>>
>>>> The disk has over 7 GB of free space, and permissions look OK on
>>>> /tmp. Has
>>>> anybody seen this problem or know of a solution? So far I'm
>>>> stumped.
>>>>
>>>> Thank you !!
>>>> -- Chris
>>>>
>>>> _______________________________________________ Linux-PowerEdge
>>>> mailing list
>>>> Linux-PowerEdge at dell.com
>>>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please
>>>> read the FAQ at http://lists.us.dell.com/faq
>>>>
>>>>
>>>
>>
>>
> _______________________________________________ Linux-PowerEdge
> mailing list
> Linux-PowerEdge at dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read
> the FAQ at http://lists.us.dell.com/faq



_______________________________________________ Linux-PowerEdge mailing
list Linux-PowerEdge at dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read
the FAQ at http://lists.us.dell.com/faq



More information about the Linux-PowerEdge mailing list