OMSA Event message

Mohd Noor Abdul Rashid mnoor53 at yahoo.com
Wed Jan 20 17:00:21 CST 2010


Hi

Thanks for respond.
Its running on version 5.4
---------------------------------------
root at mzebk01u:~/#: omreport about

Product name : Server Administrator Install Core (subscription)
Version      : 5.4.0
Copyright    : Copyright (C) Dell Inc. 1995-2008. All rights reserved.
Company      : Dell Inc.
-------------------------------------

 Mohd Noor Abdul Rashid




________________________________
From: "Mahaveer_M at Dell.com" <Mahaveer_M at Dell.com>
To: mnoor53 at yahoo.com; linux-poweredge at lists.us.dell.com
Sent: Thu, 21 January, 2010 0:25:32
Subject: RE: OMSA Event message

 
Which OM version is this ?
 
From:linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On
Behalf Of Mohd Noor Abdul Rashid
Sent: Wednesday, January 20, 2010 12:22 PM
To: linux-poweredge-Lists
Subject: OMSA Event message
 
Hi there

I had a customer which depend on OMSA to monitor his Dell server hardware
status.
Recently he did power supply redundancy test and curious on the event message
recorded where event id 1354 only comes one while 1306 was repeated several
time
Question
1. Is this expected behaviour ? as per my understand the event should be
recorded in the system message file until it was rectify
2. Why event 1354 recorded only once while event 1306 was recorded multiple
times ?
3. Customer also seek an explanation why after event id 1306 recorded twice,
then event id 1354 record only once, whereas event 1354 is more crucial than
1306
4. Is there any default timing for the message to be re-occur and recorded in
system message until the problem rectify, so that the message will be recorded
in standard interval time

Pasted below relevant portion from system message file
=================================================
Jan 14 10:59:09 mzebk01u Server Administrator: Instrumentation Service EventID:
1306  Redundancy lost  Redundancy unit: System Board PS
Redundancy  Chassis location: Main System Chassis  Previous
redundancy state was: Normal
Jan 14 10:59:09 mzebk01u snmpd[2214]: Got trap from peer on fd 16 
Jan 14 10:59:10 mzebk01u Server Administrator: Instrumentation Service EventID:
1306  Redundancy lost  Redundancy unit: System Board PS
Redundancy  Chassis location: Main System Chassis  Previous
redundancy state was: Normal
Jan 14 10:59:10 mzebk01u last message repeated 22 times
Jan 14 10:59:10 mzebk01u Server Administrator: Instrumentation Service EventID:
1354  Power supply detected a failure  Sensor location: PS 1
Status  Chassis location: Main System Chassis  Previous state was: OK
(Normal)  Power Supply type: AC  Power Supply state: Presence
detected, Failure detected, AC lost
Jan 14 10:59:10 mzebk01u Server Administrator: Instrumentation Service EventID:
1306  Redundancy lost  Redundancy unit: System Board PS
Redundancy  Chassis location: Main System Chassis  Previous
redundancy state was: Normal
Jan 14 10:59:10 mzebk01u Server Administrator: Instrumentation Service EventID:
1306  Redundancy lost  Redundancy unit: System Board PS
Redundancy  Chassis location: Main System Chassis  Previous
redundancy state was: Normal
Jan 14 10:59:10 mzebk01u snmpd[2214]: Got trap from peer on fd 16 
Jan 14 10:59:32 mzebk01u last message repeated 22 times
Jan 14 10:59:33 mzebk01u Server Administrator: Instrumentation Service EventID:
1304  Redundancy regained  Redundancy unit: System Board PS
Redundancy  Chassis location: Main System Chassis  Previous
redundancy state was: Lost
Jan 14 10:59:33 mzebk01u last message repeated 44 times
Jan 14 10:59:33 mzebk01u Server Administrator: Instrumentation Service EventID:
1352  Power supply returned to normal  Sensor location: PS 1
Status  Chassis location: Main System Chassis  Previous state was:
Critical (Failed)  Power Supply type: AC  Power Supply state:
Presence detected
Jan 14 10:59:33 mzebk01u Server Administrator: Instrumentation Service EventID:
1304  Redundancy regained  Redundancy unit: System Board PS
Redundancy  Chassis location: Main System Chassis  Previous
redundancy state was: Lost
==============================================================

Can't find relevant answer on dell support site http://support.dell.com/support/edocs/software/svradmin/5.4/en/messages/html/index.htm and
http://support.dell.com/support/edocs/software/svradmin/5.4/en/index.htm . 

Appreciate for any respond given

Thanks
 
Mohd Noor Abdul Rashid


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20100120/d8d686aa/attachment.htm 


More information about the Linux-PowerEdge mailing list