EMC AX150 node01 Array Problems. CentOS 5.4

[Francisco Cabrita]

Hi,

I'm running into problems when trying to "mount" my storage array on node01.

INFO
  Hardware:
    1 - EMC AX150
    2 - Dell's 1850

  Software
    2- CentOS 5.4_x86_64
    Kernel: 2.6.18-164.el5xen
    HBAnyware-4.1a36-1
    EMCpower.LINUX-5.3.0.00.00-185
    lpfcdriver_2.6-8.2.0.48.2p-1

I have installed this software in both servers, without any issue.
And this is working fine on node02. Everytime I start PowerPath I see
/dev/emcpowera1.

Under node01 I am lost and I can't figure anymore what I am doind wrong.
I can't see /dev/emcpowera1 as I did yesterday.

Any tip?

NODE01
[root at node01]# powermt display dev=all
Device(s) not found.


NODE2
[root at node02]# powermt display dev=all
Pseudo name=emcpowera
CLARiiON ID=FCNPR063600575 [hba1]
Logical device ID=60060160D7B91A00E2C08791455DDB11 [data]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A    Array failover mode: 1
==============================================================================
---------------- Host ---------------   - Stor -   -- I/O Path -  -- Stats
---
###  HW Path                I/O Paths    Interf.   Mode    State  Q-IOs
Errors
==============================================================================
   1 lpfc                      sdb       SP A0     active  alive      0
0


Thanks in advance,
Francisco

-- 
blog: http://sufixo.com/raw
http://www.linkedin.com/in/franciscocabrita
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20091029/5e2cc325/attachment.htm