PE1950 SAS 6/iR - omreport storage pdisk controller=0 - Error! XML Transformation failed

[Nicholas Terrell]

We are running Debian Lenny on a PE1950 with a SAS 6/iR Controller, when 
running the command "omreport storage pdisk controller=0" it gives an 
XML error (as below).
The command "omreport storage controller" and also "omreport storage 
vdisk controller=0" seem to work ok.

Anyone have any idea what could be wrong and what can be done to fix it?

System is running:
 - Debian 5.0 (Lenny)
 - 2.6.26-2 kernel
 - OMSA 5.5.0 (a sara.nl build)


# omreport storage controller
Controller  SAS 6/iR Integrated (Embedded)

Controllers
ID                                            : 0
Status                                        : Ok
Name                                          : SAS 6/iR Integrated
Slot ID                                       : Embedded
State                                         : Ready
Firmware Version                              : 00.25.47.00.06.22.03.00
Minimum Required Firmware Version             : Not Applicable
Driver Version                                : 3.04.06
Minimum Required Driver Version               : Not Applicable
Number of Connectors                          : 2                      : 2


# omreport storage vdisk controller=0
Virtual Disk 0 on Controller SAS 6/iR Integrated (Embedded)

Controller SAS 6/iR Integrated (Embedded)
ID                  : 0
Status              : Ok
Name                : Virtual Disk 0
State               : Ready
Progress            : Not Applicable
Layout              : RAID-1
Size                : 67.75 GB (72746008576 bytes)
Device Name         : /dev/sda
Type                : SAS
Read Policy         : No Read Ahead
Write Policy        : Write Through
Cache Policy        : Not Applicable
Stripe Element Size : Not Applicable


# omreport storage pdisk controller=0
Entity: line 21: parser error : CharRef: invalid decimal value
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 21: parser error : xmlParseCharRef: invalid xmlChar value 0
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 61: parser error : CharRef: invalid decimal value
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 61: parser error : xmlParseCharRef: invalid xmlChar value 0
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 21: parser error : CharRef: invalid decimal value
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 21: parser error : xmlParseCharRef: invalid xmlChar value 0
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 61: parser error : CharRef: invalid decimal value
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 61: parser error : xmlParseCharRef: invalid xmlChar value 0
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 21: parser error : CharRef: invalid decimal value
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 21: parser error : xmlParseCharRef: invalid xmlChar value 0
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 61: parser error : CharRef: invalid decimal value
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Entity: line 61: parser error : xmlParseCharRef: invalid xmlChar value 0
<Vendor type="astring">DELL&#-103;   </Vendor>
                            ^
Error! XML Transformation failed

-- 
Regards
__________________________________________ 
 
 Nick Terrell