memory errors

[Hein, Brad]

If you have OMSA installed, I would recommend using "omreport" to first
check the health of the memory banks, and then see if there were any log
messages generated. 

 

Example:

"omreport system esmlog"

"omreport system memory"

 

 

What command is the Nagios check using to perform the check? 

 

 

________________________________

From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Noble
Athimattathil
Sent: Friday, May 08, 2009 12:46 AM
To: linux-poweredge at dell.com
Subject: memory errors

 

Hello,

 

Recently I have been getting alot of nagios alerts (see below) from my
pe1950 and pe2950 servers.  The alerts says something is wrong with the
memory but I run online diag program and no errors are reported.  The
only correlation is that I have recently upgraded the firmware/bios to
the latest and greatest.  Has anyone experienced this before.

 

	Service: system_log

	Ho

	 

	st:

	Address:

	State: CRITICAL

	 

	Date/Time: Fri May 8 01:29:49 GMT 2009

	 

	Additional Info:

	 

	CRITICAL - (2 errors) - May  8 01:27:55 prf106 kernel: EDAC MC0:
UE row 3, channel-a= 2 channel-b= 3 labels -: (Branch=1 DRAM-Bank=1
RDWR=Write RAS=10873 CAS=0 FATAL Err=0x4) ...

 

Thanks for your help.

 

Noble Athimattathil

admob Enriching Mobile

noble at admob.com

P: (415) 533 1317 | F: (650) 931 3979

 

 

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090508/0de171be/attachment.htm