2650 and memtest failures

[Daniel Shaw]

Simon Waters wrote:

> It fails memtest86 checks, the failure is always the same distance from top of
> memory, and occurs with known good memory. Just like the problem described
> here by someone else....
> 

I know this is a late reply, but try disabling all the USB ports in the 
bios. Just disabling "legacy support" for them will probably work too, 
but maybe try both ways.

If memtest runs ok with USB disabled, then if there is a BIOS update 
available that *might* fix the issue with USB fully enabled too.

#####################################################################################
This e-mail message has been scanned for Viruses and Content and cleared 
by MailMarshal
#####################################################################################