Troubleshooting an R900 with ESXi
Brian O'Mahony
brian.omahony at curamsoftware.com
Wed Jun 10 08:17:37 CDT 2009
Thought as much., Cant install OMSA on them anyways (they also only have about 60M free space regardless)
So is there any way of checking hardware on an ESXi host while it is online?
B
-----Original Message-----
From: Bryan [mailto:bryan.madhatter at gmail.com]
Sent: 10 June 2009 14:16
To: Brian O'Mahony
Subject: Re: Troubleshooting an R900 with ESXi
The functionality to run diags/dset isn't available in ESXi. Busybox
doesn't support dset/online diags. OMSA 6.0.3 should allow reporting,
but not diags.
On 6/10/09, Brian O'Mahony <brian.omahony at curamsoftware.com> wrote:
> I have a few R900s and im wondering if there is any way to run DSET or the
> Online Diags while the machine is running. I currently may have an issue
> with one of them, but I cant afford to bring it down for a good while.
>
> I have enabled ssh on the ESXi 3.5 busybox, and can ssh in remotely. I
> copied over the dset .17.0.119 that I had, but it doesn't start with a
> "typset not found error" roughly 20-30 times.
>
> I cant seem to find a binary of the online/pediags - sems to be all rpm
> files. Is this available?
>
> Anybody done this on ESX?
>
>
> The information in this email is confidential and may be legally privileged.
> It is intended solely for the addressee. Access to this email by anyone else
> is unauthorized. If you are not the intended recipient, any disclosure,
> copying, distribution or any action taken or omitted to be taken in reliance
> on it, is prohibited and may be unlawful. If you are not the intended
> addressee please contact the sender and dispose of this e-mail. Thank you.
>
The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorized. If you are not the intended recipient, any disclosure,
copying, distribution or any action taken or omitted to be taken in reliance
on it, is prohibited and may be unlawful. If you are not the intended
addressee please contact the sender and dispose of this e-mail. Thank you.
More information about the Linux-PowerEdge
mailing list