omreport not displaying information

[Flaherty, Patrick]

Hey Frank,

This problem gets dicussed on the list every few months. Here's my
troubleshooting steps.
 
http://lists.us.dell.com/pipermail/linux-poweredge/2008-October/037637.h
tml 

Doesn't always works, usually does the trick for me though.

Patrick

> -----Original Message-----
> From: linux-poweredge-bounces at lists.us.dell.com 
> [mailto:linux-poweredge-bounces at lists.us.dell.com] On Behalf 
> Of Frank Collette IV
> Sent: Friday, July 17, 2009 9:04 AM
> To: linux-poweredge at dell.com
> Subject: Re: omreport not displaying information
> 
> Unfortunately, didn't resolve the issue.
>  
> 
> 	[root at jxnms001 ~]# /opt/dell/srvadmin/hapi/bin/dsm_sa_ipmi start
> 	Starting dsm_sa_ipmi drivers:
> 	                                                        
>    [  OK  ]
> 
> 
> 	 [root at jxnms001 ~]# srvadmin-services.sh status
> 	dell_rbu (module) is stopped
> 	ipmi driver is stopped
> 	dsm_sa_datamgr32d is stopped
> 	dsm_sa_eventmgr32d is stopped
> 	dsm_sa_snmp32d is stopped
> 
> 	dsm_om_shrsvc32d (pid 18874) is running
> 	dsm_om_connsvc32d (pid 18938 18937) is running
> 	
> 	[root at jxnms001 ~]# srvadmin-services.sh restart
> 
> 
> 	Shutting down DSM SA Shared Services:                   
>    [  OK  ]
> 	
> 	
> 	Shutting down DSM SA Connection Service:                
>    [  OK  ]
> 	
> 	
> 	Starting mptctl:
> 	Waiting for mptctl driver registration to complete:
> 	
> 
>                               
> 
> 	                             [  OK  ]
> 	
> 	Starting Systems Management Device Drivers:
> 	Starting dell_rbu:                                      
>    [  OK  ]
> 	Starting ipmi driver:                                   
>    [  OK  ]
> 	Starting Systems Management Device Drivers:
> 	Starting dell_rbu: Already started                      
>    [  OK  ]
> 	Starting ipmi driver:                                   
>    [  OK  ]
> 	Starting Systems Management Data Engine:
> 	Starting dsm_sa_datamgr32d:                             
>    [  OK  ]
> 	Starting dsm_sa_eventmgr32d:                            
>    [  OK  ]
> 	Starting dsm_sa_snmp32d:                                
>    [  OK  ]
> 	Starting DSM SA Shared Services:                        
>    [  OK  ]
> 	
> 	Starting DSM SA Connection Service:                     
>    [  OK  ]
> 	
> 	[root at jxnms001 ~]# srvadmin-services.sh status
> 
> 	dell_rbu (module) is running
> 	ipmi driver is stopped
> 	
> 	dsm_sa_datamgr32d (pid 20901) is running
> 	dsm_sa_eventmgr32d is stopped
> 	dsm_sa_snmp32d is stopped
> 	dsm_om_shrsvc32d (pid 20971) is running
> 	dsm_om_connsvc32d (pid 21035 21034) is running
> 	[root at jxnms001 ~]#
> 
> 
> 
> On Thu, Jul 16, 2009 at 3:23 PM, Chase Bolt 
> <cbolt at datinggold.com> wrote:
> 
> 
> 	Try running these two commands and see if it fixes it.
> 	
> 	# /opt/dell/srvadmin/hapi/bin/dsm_sa_ipmi start
> 	# srvadmin-services.sh restart
> 	
> 	
> 	Frank Collette IV wrote: 
> 
> 		Output that would be requested is displayed below.
> 		
> 		
> 
> 			[root at jxnms001 bin]# srvadmin-services.sh status
> 			dell_rbu (module) is running
> 			ipmi driver is stopped
> 			dsm_sa_datamgr32d (pid 19839) is running
> 			dsm_sa_eventmgr32d (pid 19893) is running
> 			dsm_sa_snmp32d (pid 19917 19916) is running
> 			dsm_om_shrsvc32d (pid 18874) is running
> 			dsm_om_connsvc32d (pid 18938 18937) is running
> 			[root at jxnms001 bin]#
> 
> 
> 		Output of what srvadmin versions I'm running:
> 		
> 		
> 
> 			[root at jxnms001 bin]# rpm -qa |grep srvadmin
> 			srvadmin-omilcore-6.1.0-648
> 			srvadmin-racadm4-6.1.0-648
> 			srvadmin-rac4-6.1.0-648
> 			srvadmin-webserver-6.1.0-648
> 			srvadmin-omacore-6.1.0-648
> 			srvadmin-omauth-6.1.0-648.rhel5
> 			srvadmin-racadm5-6.1.0-648
> 			srvadmin-rac5-6.1.0-648
> 			srvadmin-omcommon-6.1.0-648
> 			srvadmin-isvc-6.1.0-648
> 			srvadmin-rac4-components-6.1.0-648
> 			srvadmin-base-6.1.0-648
> 			srvadmin-racdrsc5-6.1.0-648
> 			srvadmin-wsmanclient-6.1.0-648.rhel5
> 			srvadmin-idracdrsc-6.1.0-648
> 			srvadmin-ssa-6.1.0-648.rhel5
> 			srvadmin-syscheck-6.1.0-648
> 			srvadmin-omhip-6.1.0-648
> 			srvadmin-cm-6.1.0-648
> 			srvadmin-racdrsc4-6.1.0-648
> 			srvadmin-storage-6.1.0-648
> 			srvadmin-iws-6.1.0-648
> 			srvadmin-idracadm-6.1.0-648
> 			srvadmin-standardAgent-6.1.0-648
> 			srvadmin-deng-6.1.0-648
> 			srvadmin-jre-6.1.0-648
> 			srvadmin-storageservices-6.1.0-648
> 			srvadmin-idrac-6.1.0-648
> 			srvadmin-all-6.1.0-648
> 			srvadmin-hapi-6.1.0-648
> 			srvadmin-racsvc-6.1.0-648
> 			srvadmin-rac5-components-6.1.0-648
> 			srvadmin-idrac-components-6.1.0-648
> 			[root at jxnms001 bin]#
> 
> 
> 		Now, output of my omreport commands:
> 		
> 		
> 
> 			[root at jxnms001 bin]# omreport chassis
> 			Health
> 			
> 			For further help, type the command 
> followed by -?
> 			
> 			[root at jxnms001 bin]# omreport storage vdisk
> 			List of Virtual Disks on Controller  (Slot )
> 			
> 			[root at jxnms001 bin]# omreport storage 
> pdisk controller=0
> 			Invalid controller value. Read, controller=0
> 			No controllers found.
> 			
> 			[root at jxnms001 bin]#
> 
> 
> 		Anyone with any idea of what might be happening 
> here, please let me know.  I have not rebooted the server, 
> but wouldn't think I would need to either.  omreport chassis 
> did work 1 time, but afterwards all services stopped, very strange.
> 		
> 		Thanks for any help provided!
> 		
> 		--Frank 
> 		
> 		
> ________________________________
> 
> 
> 		_______________________________________________
> 		Linux-PowerEdge mailing list
> 		Linux-PowerEdge at lists.us.dell.com
> 		
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> 		Please read the FAQ at http://lists.us.dell.com/faq
> 
> 
>