Linux-PowerEdge Digest, Vol 60, Issue 31
Mark Dundore
markdundore at westernintl.com
Thu Jul 16 16:07:10 CDT 2009
CentOS5.2 install will not recognize xsane-0.991-5.el5.i386.rpm on disk
2. Tried it with 4x and 12x- no help. Any ideas?
Thanks,
Mark
-----Original Message-----
From: linux-poweredge-bounces at lists.us.dell.com
[mailto:linux-poweredge-bounces at lists.us.dell.com] On Behalf Of
linux-poweredge-request at lists.us.dell.com
Sent: Thursday, July 16, 2009 3:23 PM
To: linux-poweredge at lists.us.dell.com
Subject: Linux-PowerEdge Digest, Vol 60, Issue 31
Send Linux-PowerEdge mailing list submissions to
linux-poweredge at lists.us.dell.com
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
or, via email, send a message with subject or body 'help' to
linux-poweredge-request at lists.us.dell.com
You can reach the person managing the list at
linux-poweredge-owner at lists.us.dell.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Linux-PowerEdge digest..."
Today's Topics:
1. Ubuntu 8.04 64bit on R410 (Dan Simoes)
2. RE: Ubuntu on R410 (Drew Weaver)
3. omreport not displaying information (Frank Collette IV)
4. Re: omreport not displaying information (Chase Bolt)
----------------------------------------------------------------------
Message: 1
Date: Thu, 16 Jul 2009 11:01:47 -0700
From: Dan Simoes <dan.simoes at gmail.com>
Subject: Ubuntu 8.04 64bit on R410
To: linux-poweredge at lists.us.dell.com
Message-ID:
<c8c8f8540907161101k1ac5f993p52679c0b9a33974d at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
We're about to place an order for a significant number of these
servers, but I can't get an official answer on whether 8.04 installs
cleanly and without issue. As I told my Dell team, this is pretty
disappointing considering it's 2009 and we're talking about a product
from a Dell partner (Canonical).
I'm sure there is someone within Dell that has this answer, and yes, I
know it depends on the config, but assuming no special options, does
it work or not?
An unofficial answer is fine and I will not requote/retweet your
reply, I just need some facts before placing my order.
Thanks.
Dan
------------------------------
Message: 2
Date: Thu, 16 Jul 2009 14:13:18 -0400
From: Drew Weaver <drew.weaver at thenap.com>
Subject: RE: Ubuntu on R410
To: "'Prashant Ramhit'" <prashant at bluebarracuda.com>
Cc: "'linux-poweredge at lists.us.dell.com'"
<linux-poweredge at lists.us.dell.com>
Message-ID:
<F3318834F1F89D46857972DD4B411D7011C3D8E3 at EXCHANGE.thenap.com>
Content-Type: text/plain; charset="us-ascii"
Just go into the DRAC setup at boot and set it to 'detached'.
thanks,
-Drew
From: Prashant Ramhit [mailto:prashant at bluebarracuda.com]
Sent: Thursday, July 16, 2009 2:13 PM
To: Drew Weaver
Cc: linux-poweredge at lists.us.dell.com
Subject: Re: Ubuntu on R410
Thanks for your your valuable answers, sorry for the typo error
the disk was indeed sdb3 not sda3
Giving up waiting for root device
Alert /dev/sdb3 (not sda3) does not exist
Dropping to a shell
Therefore i still have the same error though.
I have virtual media installed. can you please tell me how to remove the
virtual disks please.
Kind Regards,
Prashant
Drew Weaver wrote:
Do you have a DRAC on this system?
If so detach virtual media and that should fix it, we've been battling
this for years.
For some reason virtual media becomes /dev/sda
thanks,
-Drew
-----Original Message-----
From:
linux-poweredge-bounces at lists.us.dell.com<mailto:linux-poweredge-bounces
@lists.us.dell.com> [mailto:linux-poweredge-bounces at lists.us.dell.com]
On Behalf Of Simon Waters
Sent: Thursday, July 16, 2009 8:59 AM
To:
linux-poweredge at lists.us.dell.com<mailto:linux-poweredge at lists.us.dell.c
om>
Subject: Re: Ubuntu on R410
On Thursday 16 July 2009 13:34:46 Dan Simoes wrote:
That's the problem - your drive is sdb, not sda. Edit fstab to show
sdb partitions.
Any other controllers or drives present? Odd that it would switch the
order to sdb.
We've seen this when adding external arrays on a PERC6E for example,
but not with a single drive/array.
This wouldn't explain why it didn't work with UUID and the installer.
There is a Debian bug suggesting that some kernel versions cause issues
with
this hardware configuration.
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at lists.us.dell.com<mailto:Linux-PowerEdge at lists.us.dell.c
om>
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at lists.us.dell.com<mailto:Linux-PowerEdge at lists.us.dell.c
om>
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090716/
1a98eb6f/attachment-0001.htm
------------------------------
Message: 3
Date: Thu, 16 Jul 2009 15:00:16 -0500
From: Frank Collette IV <frankc at ultraonline.net>
Subject: omreport not displaying information
To: linux-poweredge at dell.com
Message-ID:
<76c64b720907161300k702c5dafs9a445eae293667a2 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Output that would be requested is displayed below.
[root at jxnms001 bin]# srvadmin-services.sh status
> dell_rbu (module) is running
> ipmi driver is stopped
> dsm_sa_datamgr32d (pid 19839) is running
> dsm_sa_eventmgr32d (pid 19893) is running
> dsm_sa_snmp32d (pid 19917 19916) is running
> dsm_om_shrsvc32d (pid 18874) is running
> dsm_om_connsvc32d (pid 18938 18937) is running
> [root at jxnms001 bin]#
Output of what srvadmin versions I'm running:
[root at jxnms001 bin]# rpm -qa |grep srvadmin
> srvadmin-omilcore-6.1.0-648
> srvadmin-racadm4-6.1.0-648
> srvadmin-rac4-6.1.0-648
> srvadmin-webserver-6.1.0-648
> srvadmin-omacore-6.1.0-648
> srvadmin-omauth-6.1.0-648.rhel5
> srvadmin-racadm5-6.1.0-648
> srvadmin-rac5-6.1.0-648
> srvadmin-omcommon-6.1.0-648
> srvadmin-isvc-6.1.0-648
> srvadmin-rac4-components-6.1.0-648
> srvadmin-base-6.1.0-648
> srvadmin-racdrsc5-6.1.0-648
> srvadmin-wsmanclient-6.1.0-648.rhel5
> srvadmin-idracdrsc-6.1.0-648
> srvadmin-ssa-6.1.0-648.rhel5
> srvadmin-syscheck-6.1.0-648
> srvadmin-omhip-6.1.0-648
> srvadmin-cm-6.1.0-648
> srvadmin-racdrsc4-6.1.0-648
> srvadmin-storage-6.1.0-648
> srvadmin-iws-6.1.0-648
> srvadmin-idracadm-6.1.0-648
> srvadmin-standardAgent-6.1.0-648
> srvadmin-deng-6.1.0-648
> srvadmin-jre-6.1.0-648
> srvadmin-storageservices-6.1.0-648
> srvadmin-idrac-6.1.0-648
> srvadmin-all-6.1.0-648
> srvadmin-hapi-6.1.0-648
> srvadmin-racsvc-6.1.0-648
> srvadmin-rac5-components-6.1.0-648
> srvadmin-idrac-components-6.1.0-648
> [root at jxnms001 bin]#
Now, output of my omreport commands:
[root at jxnms001 bin]# omreport chassis
> Health
>
> For further help, type the command followed by -?
>
> [root at jxnms001 bin]# omreport storage vdisk
> List of Virtual Disks on Controller (Slot )
>
> [root at jxnms001 bin]# omreport storage pdisk controller=0
> Invalid controller value. Read, controller=0
> No controllers found.
>
> [root at jxnms001 bin]#
Anyone with any idea of what might be happening here, please let me
know. I
have not rebooted the server, but wouldn't think I would need to either.
omreport chassis did work 1 time, but afterwards all services stopped,
very
strange.
Thanks for any help provided!
--Frank
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090716/
12b8f336/attachment-0001.htm
------------------------------
Message: 4
Date: Thu, 16 Jul 2009 13:23:17 -0700
From: Chase Bolt <cbolt at datinggold.com>
Subject: Re: omreport not displaying information
To: Frank Collette IV <frankc at ultraonline.net>
Cc: linux-poweredge at dell.com
Message-ID: <4A5F8C35.1060106 at datinggold.com>
Content-Type: text/plain; charset="iso-8859-1"
Try running these two commands and see if it fixes it.
# /opt/dell/srvadmin/hapi/bin/dsm_sa_ipmi start
# srvadmin-services.sh restart
Frank Collette IV wrote:
> Output that would be requested is displayed below.
>
> [root at jxnms001 bin]# srvadmin-services.sh status
> dell_rbu (module) is running
> ipmi driver is stopped
> dsm_sa_datamgr32d (pid 19839) is running
> dsm_sa_eventmgr32d (pid 19893) is running
> dsm_sa_snmp32d (pid 19917 19916) is running
> dsm_om_shrsvc32d (pid 18874) is running
> dsm_om_connsvc32d (pid 18938 18937) is running
> [root at jxnms001 bin]#
>
>
> Output of what srvadmin versions I'm running:
>
> [root at jxnms001 bin]# rpm -qa |grep srvadmin
> srvadmin-omilcore-6.1.0-648
> srvadmin-racadm4-6.1.0-648
> srvadmin-rac4-6.1.0-648
> srvadmin-webserver-6.1.0-648
> srvadmin-omacore-6.1.0-648
> srvadmin-omauth-6.1.0-648.rhel5
> srvadmin-racadm5-6.1.0-648
> srvadmin-rac5-6.1.0-648
> srvadmin-omcommon-6.1.0-648
> srvadmin-isvc-6.1.0-648
> srvadmin-rac4-components-6.1.0-648
> srvadmin-base-6.1.0-648
> srvadmin-racdrsc5-6.1.0-648
> srvadmin-wsmanclient-6.1.0-648.rhel5
> srvadmin-idracdrsc-6.1.0-648
> srvadmin-ssa-6.1.0-648.rhel5
> srvadmin-syscheck-6.1.0-648
> srvadmin-omhip-6.1.0-648
> srvadmin-cm-6.1.0-648
> srvadmin-racdrsc4-6.1.0-648
> srvadmin-storage-6.1.0-648
> srvadmin-iws-6.1.0-648
> srvadmin-idracadm-6.1.0-648
> srvadmin-standardAgent-6.1.0-648
> srvadmin-deng-6.1.0-648
> srvadmin-jre-6.1.0-648
> srvadmin-storageservices-6.1.0-648
> srvadmin-idrac-6.1.0-648
> srvadmin-all-6.1.0-648
> srvadmin-hapi-6.1.0-648
> srvadmin-racsvc-6.1.0-648
> srvadmin-rac5-components-6.1.0-648
> srvadmin-idrac-components-6.1.0-648
> [root at jxnms001 bin]#
>
>
> Now, output of my omreport commands:
>
> [root at jxnms001 bin]# omreport chassis
> Health
>
> For further help, type the command followed by -?
>
> [root at jxnms001 bin]# omreport storage vdisk
> List of Virtual Disks on Controller (Slot )
>
> [root at jxnms001 bin]# omreport storage pdisk controller=0
> Invalid controller value. Read, controller=0
> No controllers found.
>
> [root at jxnms001 bin]#
>
>
> Anyone with any idea of what might be happening here, please let me
> know. I have not rebooted the server, but wouldn't think I would need
> to either. omreport chassis did work 1 time, but afterwards all
> services stopped, very strange.
>
> Thanks for any help provided!
>
> --Frank
>
------------------------------------------------------------------------
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at lists.us.dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090716/
15a0e706/attachment.htm
------------------------------
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at lists.us.dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
End of Linux-PowerEdge Digest, Vol 60, Issue 31
***********************************************
More information about the Linux-PowerEdge
mailing list