omreport not displaying information

[Chase Bolt]

Try running these two commands and see if it fixes it.

# /opt/dell/srvadmin/hapi/bin/dsm_sa_ipmi start
# srvadmin-services.sh restart


Frank Collette IV wrote:
> Output that would be requested is displayed below.
>
>     [root at jxnms001 bin]# srvadmin-services.sh status
>     dell_rbu (module) is running
>     ipmi driver is stopped
>     dsm_sa_datamgr32d (pid 19839) is running
>     dsm_sa_eventmgr32d (pid 19893) is running
>     dsm_sa_snmp32d (pid 19917 19916) is running
>     dsm_om_shrsvc32d (pid 18874) is running
>     dsm_om_connsvc32d (pid 18938 18937) is running
>     [root at jxnms001 bin]#
>
>
> Output of what srvadmin versions I'm running:
>
>     [root at jxnms001 bin]# rpm -qa |grep srvadmin
>     srvadmin-omilcore-6.1.0-648
>     srvadmin-racadm4-6.1.0-648
>     srvadmin-rac4-6.1.0-648
>     srvadmin-webserver-6.1.0-648
>     srvadmin-omacore-6.1.0-648
>     srvadmin-omauth-6.1.0-648.rhel5
>     srvadmin-racadm5-6.1.0-648
>     srvadmin-rac5-6.1.0-648
>     srvadmin-omcommon-6.1.0-648
>     srvadmin-isvc-6.1.0-648
>     srvadmin-rac4-components-6.1.0-648
>     srvadmin-base-6.1.0-648
>     srvadmin-racdrsc5-6.1.0-648
>     srvadmin-wsmanclient-6.1.0-648.rhel5
>     srvadmin-idracdrsc-6.1.0-648
>     srvadmin-ssa-6.1.0-648.rhel5
>     srvadmin-syscheck-6.1.0-648
>     srvadmin-omhip-6.1.0-648
>     srvadmin-cm-6.1.0-648
>     srvadmin-racdrsc4-6.1.0-648
>     srvadmin-storage-6.1.0-648
>     srvadmin-iws-6.1.0-648
>     srvadmin-idracadm-6.1.0-648
>     srvadmin-standardAgent-6.1.0-648
>     srvadmin-deng-6.1.0-648
>     srvadmin-jre-6.1.0-648
>     srvadmin-storageservices-6.1.0-648
>     srvadmin-idrac-6.1.0-648
>     srvadmin-all-6.1.0-648
>     srvadmin-hapi-6.1.0-648
>     srvadmin-racsvc-6.1.0-648
>     srvadmin-rac5-components-6.1.0-648
>     srvadmin-idrac-components-6.1.0-648
>     [root at jxnms001 bin]#
>
>
> Now, output of my omreport commands:
>
>     [root at jxnms001 bin]# omreport chassis
>     Health
>
>     For further help, type the command followed by -?
>
>     [root at jxnms001 bin]# omreport storage vdisk
>     List of Virtual Disks on Controller  (Slot )
>
>     [root at jxnms001 bin]# omreport storage pdisk controller=0
>     Invalid controller value. Read, controller=0
>     No controllers found.
>
>     [root at jxnms001 bin]#
>
>
> Anyone with any idea of what might be happening here, please let me 
> know.  I have not rebooted the server, but wouldn't think I would need 
> to either.  omreport chassis did work 1 time, but afterwards all 
> services stopped, very strange.
>
> Thanks for any help provided!
>
> --Frank
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at lists.us.dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090716/15a0e706/attachment-0001.htm