SV: PERC 5/i remove disks from RAID

[J. Epperson]

Don't have a 1950, but with most PERC cards you'd set those 3 new volumes
up as single disk RAID 0, BTW.

On Wed, July 8, 2009 12:51, Johan Sjöberg wrote:
> You should be able to remove the current configuration and create 3 new
> volumes, in Perc BIOS. But you will lose any data currently stored on the
> RAID5.
>
> /Johan
>
> -----Ursprungligt meddelande-----
> Från: linux-poweredge-bounces at lists.us.dell.com
> [mailto:linux-poweredge-bounces at lists.us.dell.com] För Rafael Diaz Maurin
> Skickat: den 8 juli 2009 17:53
> Till: Linux-PowerEdge at lists.us.dell.com
> Ämne: PERC 5/i remove disks from RAID
>
> Hi everybody,
>
> I have a Power Edge 1950 with a Perc 5/i controler with 3 SAS disks.
>
> For some reasons, I wan't to remove those disks from the RAID5 in order
> to have 3 separate Hard Disks in my Operating System.
>
> I can't succeed in it with the Perc BIOS, nor the OMSA v5.
> Is it possible to do this with Open Manage or MegaCLi ?
> And how can I do it ?
>
> Thank you for your answers,
>
> --
> Rafael
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at lists.us.dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at lists.us.dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
>