PE2950 error messages:mptctldrivers/message/fusion/mptctl.c::mptctl_ioctl()

[Shyam_Iyer at Dell.com]

Yes. You don't need the mptsas modules for the PERC 6i controller so you
could safely comment out the mpt modules in modprobe.conf.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Rainer Traut
Sent: Friday, January 23, 2009 3:45 PM
To: linux-poweredge-Lists
Subject: PE2950 error
messages:mptctldrivers/message/fusion/mptctl.c::mptctl_ioctl()

Hi,

I get these error messsages in the kernel log on a PE2950 with RHEL 5.3
x86_64, the system only has a PERC 6i Controller:


mptctldrivers/message/fusion/mptctl.c::mptctl_ioctl() @596 - ioc1 not
found!
mptctldrivers/message/fusion/mptctl.c::mptctl_ioctl() @596 - ioc2 not
found!
mptctldrivers/message/fusion/mptctl.c::mptctl_ioctl() @596 - ioc3 not 
found!
...

modprobe.conf:

alias eth0 bnx2
alias eth1 bnx2
alias eth2 tg3
alias scsi_hostadapter megaraid_sas
alias scsi_hostadapter1 ata_piix
alias scsi_hostadapter2 usb-storage
alias scsi_hostadapter3 mptspi
alias scsi_hostadapter4 mptsas


My guess is I can safely uncomment the mpt* modules?

Thx
Rainer

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq