Each-Disk-RAID-0 on PERC 6/i

[Bryan]

The PERC5 was a daughter card.  There isn't a toggle.  That was on mostly on
8th gens that hard integrated controllers like the PERC4/edi where raid
functionality was controlled via raid key and bios settings.

On Wed, Jan 21, 2009 at 8:16 PM, Ben Scott <mailvortex at gmail.com> wrote:

> On Wed, Jan 21, 2009 at 5:33 PM, Tim Utschig <tim at tetro.net> wrote:
> > We have each disk configured as a single-disk RAID-0 Virtual
> > Disk, since the PERC doesn't seem to have a proper JBOD mode.
>
>  I'm not sure, and don't want to take our 2900 down to check, but
> isn't there a main BIOS option somewhere to just completely disable
> the integrated RAID controller, and have it act as a plain old disk
> controller?
>
>  For that matter, isn't the PERC 6/i an option on that model?  Pull
> the RAID card or key or whatever it uses, and it'll act like a dumb
> disk controller again.
>
>  No?
>
> -- Ben
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090121/ac1c28fc/attachment.htm