MegaCli 1.01.39 cannot address any disk

[Laurent PELLISSIER]

Ok it works best when chosing the right Device Id :

# ./MegaCli -EncInfo -a0

     Number of enclosures on adapter 0 -- 1

     Enclosure 0:
     Device ID                     : 32
     Number of Slots               : 6
     Number of Power Supplies      : 0

Then :

# ./MegaCli -PDLocate -start -PhysDrv [32:1] -a0



Laurent PELLISSIER a écrit :

> Hello Everyone,
> 
> I have a working 2950 with 4 HD attached to a PERC 6/i. The array is a 
> classical RAID5 3xHD+spare. Everything works fine under RHEL 5.2 except 
> that I cannot address any hard drive throught MegaCli 1.01.39 :
> 
> # ./MegaCli -PDOffline -PhysDrv [0:1] -a0
> 
> Adapter 0: Device at Enclosure - 0, Slot - 1 is not found
> 
> 
> The problem is the same for any command requiring a parameter like 
> [E:S], not only pdoffline.
> 
> 
> # ./MegaCli -PdLocate -start -physdrv [0:0] -a0
> 
> Adapter 0: Device at Enclosure - 0, Slot - 0 is not found.
> 
> 
> Of course the drives are there in the slot 0 to slot 3:
> 
> # ./MegaCli -EncInfo -a0
>      Number of enclosures on adapter 0 -- 1
> 
>      Enclosure 0:
>      Device ID                     : 32
>      Number of Slots               : 6
>      Number of Power Supplies      : 0
>      Number of Fans                : 0
>      Number of Temperature Sensors : 0
>      Number of Alarms              : 0
>      Number of SIM Modules         : 0
>      Number of Physical Drives     : 4
>      Status                        : Normal
>      Position                      : Unavailable
>      Connector Name                : Unavailable
> 
> # ./MegaCli -PDList -a0
> 
> Adapter #0
> 
> Enclosure Device ID: 32
> Slot Number: 0
> Device Id: 0
> Sequence Number: 2
> Media Error Count: 0
> Other Error Count: 0
> Predictive Failure Count: 0
> Last Predictive Failure Event Seq Number: 0
> Raw Size: 286102MB [0x22ecb25c Sectors]
> Non Coerced Size: 285590MB [0x22dcb25c Sectors]
> Coerced Size: 285568MB [0x22dc0000 Sectors]
> Firmware state: Online
> SAS Address(0): 0x5000c50006ef4c51
> SAS Address(1): 0x0
> Connected Port Number: 0(path0)
> Inquiry Data: SEAGATE ST3300555SS     T2113LM4BB9D
> 
> Enclosure Device ID: 32
> Slot Number: 1
> Device Id: 1
> Sequence Number: 7
> Media Error Count: 0
> Other Error Count: 0
> Predictive Failure Count: 0
> Last Predictive Failure Event Seq Number: 0
> Raw Size: 286102MB [0x22ecb25c Sectors]
> Non Coerced Size: 285590MB [0x22dcb25c Sectors]
> Coerced Size: 285568MB [0x22dc0000 Sectors]
> Firmware state: Unconfigured(good)
> SAS Address(0): 0x5000c50006ef5e29
> SAS Address(1): 0x0
> Connected Port Number: 1(path0)
> Inquiry Data: SEAGATE ST3300555SS     T2113LM4ADE9
> This Drive Is Foreign.
> 
> Enclosure Device ID: 32
> Slot Number: 2
> Device Id: 2
> Sequence Number: 2
> Media Error Count: 0
> Other Error Count: 0
> Predictive Failure Count: 0
> Last Predictive Failure Event Seq Number: 0
> Raw Size: 286102MB [0x22ecb25c Sectors]
> Non Coerced Size: 285590MB [0x22dcb25c Sectors]
> Coerced Size: 285568MB [0x22dc0000 Sectors]
> Firmware state: Online
> SAS Address(0): 0x5000c50006ef748d
> SAS Address(1): 0x0
> Connected Port Number: 2(path0)
> Inquiry Data: SEAGATE ST3300555SS     T2113LM49BCQ
> 
> Enclosure Device ID: 32
> Slot Number: 3
> Device Id: 3
> Sequence Number: 4
> Media Error Count: 0
> Other Error Count: 0
> Predictive Failure Count: 0
> Last Predictive Failure Event Seq Number: 0
> Raw Size: 286102MB [0x22ecb25c Sectors]
> Non Coerced Size: 285590MB [0x22dcb25c Sectors]
> Coerced Size: 285568MB [0x22dc0000 Sectors]
> Firmware state: Online
> SAS Address(0): 0x5000c50006ef66d5
> SAS Address(1): 0x0
> Connected Port Number: 3(path0)
> Inquiry Data: SEAGATE ST3300555SS     T2113LM4B3VB
> 
> Best regards
> 


-- 
Laurent PELLISSIER @ Ecole des Mines d'Alès