MegaCli 1.01.39 cannot address any disk

[Laurent PELLISSIER]

Hello Everyone,

I have a working 2950 with 4 HD attached to a PERC 6/i. The array is a 
classical RAID5 3xHD+spare. Everything works fine under RHEL 5.2 except 
that I cannot address any hard drive throught MegaCli 1.01.39 :

# ./MegaCli -PDOffline -PhysDrv [0:1] -a0

Adapter 0: Device at Enclosure - 0, Slot - 1 is not found


The problem is the same for any command requiring a parameter like 
[E:S], not only pdoffline.


# ./MegaCli -PdLocate -start -physdrv [0:0] -a0

Adapter 0: Device at Enclosure - 0, Slot - 0 is not found.


Of course the drives are there in the slot 0 to slot 3:

# ./MegaCli -EncInfo -a0
     Number of enclosures on adapter 0 -- 1

     Enclosure 0:
     Device ID                     : 32
     Number of Slots               : 6
     Number of Power Supplies      : 0
     Number of Fans                : 0
     Number of Temperature Sensors : 0
     Number of Alarms              : 0
     Number of SIM Modules         : 0
     Number of Physical Drives     : 4
     Status                        : Normal
     Position                      : Unavailable
     Connector Name                : Unavailable

# ./MegaCli -PDList -a0

Adapter #0

Enclosure Device ID: 32
Slot Number: 0
Device Id: 0
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
Raw Size: 286102MB [0x22ecb25c Sectors]
Non Coerced Size: 285590MB [0x22dcb25c Sectors]
Coerced Size: 285568MB [0x22dc0000 Sectors]
Firmware state: Online
SAS Address(0): 0x5000c50006ef4c51
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: SEAGATE ST3300555SS     T2113LM4BB9D

Enclosure Device ID: 32
Slot Number: 1
Device Id: 1
Sequence Number: 7
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
Raw Size: 286102MB [0x22ecb25c Sectors]
Non Coerced Size: 285590MB [0x22dcb25c Sectors]
Coerced Size: 285568MB [0x22dc0000 Sectors]
Firmware state: Unconfigured(good)
SAS Address(0): 0x5000c50006ef5e29
SAS Address(1): 0x0
Connected Port Number: 1(path0)
Inquiry Data: SEAGATE ST3300555SS     T2113LM4ADE9
This Drive Is Foreign.

Enclosure Device ID: 32
Slot Number: 2
Device Id: 2
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
Raw Size: 286102MB [0x22ecb25c Sectors]
Non Coerced Size: 285590MB [0x22dcb25c Sectors]
Coerced Size: 285568MB [0x22dc0000 Sectors]
Firmware state: Online
SAS Address(0): 0x5000c50006ef748d
SAS Address(1): 0x0
Connected Port Number: 2(path0)
Inquiry Data: SEAGATE ST3300555SS     T2113LM49BCQ

Enclosure Device ID: 32
Slot Number: 3
Device Id: 3
Sequence Number: 4
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
Raw Size: 286102MB [0x22ecb25c Sectors]
Non Coerced Size: 285590MB [0x22dcb25c Sectors]
Coerced Size: 285568MB [0x22dc0000 Sectors]
Firmware state: Online
SAS Address(0): 0x5000c50006ef66d5
SAS Address(1): 0x0
Connected Port Number: 3(path0)
Inquiry Data: SEAGATE ST3300555SS     T2113LM4B3VB

Best regards

-- 
Laurent PELLISSIER @ Ecole des Mines d'Alès