PowerPath

[madunix]

[root at linux4 ~]# rpm -qa | grep -i emc
EMCpower.LINUX-5.3.0.00.00-185


On Wed, Apr 15, 2009 at 5:04 PM, Jeff Macfarland
<jmacfarland at nexatech.com> wrote:
> Which version of PP do you have installed?
>
> rpm -qa | grep -i emc
> EMCpower.LINUX-5.1.2.00.00-021.x86_64
>
> I'm pretty sure you need EMCpower.LINUX-5.3.0.00.00-185.rhel5 for RH 5.3 support though I don't have the resources to verify.
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of madunix
> Sent: Wednesday, April 15, 2009 6:17 AM
> To: linux-poweredge
> Subject: Re: PowerPath
>
> [root at linux4 etc]# powermt check_registration
>
> Key: xxxx xxxx xxxx xxxx xxxx xxxx
>  Product: PowerPath
>  Capabilities: All
> Segmentation fault
>
> [root at linux4 etc]# lsmod | grep -i emc
> shows nothing
>
> On Wed, Apr 15, 2009 at 12:38 PM, madunix <madunix at gmail.com> wrote:
>> after rebooting my Linux server, am not able to startup the PowerPath
>> it gave the following
>>
>> [root at linux4 ~]# mount -a
>> mount: special device /dev/emc4_vg1/emc4_lv1 does not exist
>>
>>
>> [root at linux4 ~]# /etc/init.d/PowerPath start, am not using device-multipath
>> Starting PowerPath: PowerPath could not load module emcpmpx
>>
>> [root at linux4 ~]# /etc/init.d/PowerPath stop
>> Stopping PowerPath: PowerPath is not running
>>  done
>>
>> [root at linux4 ~]# uname -a
>> Linux linux4.sdc.lan 2.6.18-128.1.6.el5
>>
>> [root at linux4 ~]# cat /etc/redhat-release
>> Red Hat Enterprise Linux Server release 5.3 (Tikanga)
>>
>> [root at linux4 ~]# cat /etc/fstab
>> /dev/VolGroup00/LogVol00 /                       ext3    defaults        1 1
>> LABEL=/boot             /boot                   ext3    defaults        1 2
>> devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
>> tmpfs                   /dev/shm                tmpfs   defaults        0 0
>> proc                    /proc                   proc    defaults        0 0
>> sysfs                   /sys                    sysfs   defaults        0 0
>> /dev/VolGroup00/LogVol01 swap                    swap    defaults        0 0
>> /dev/emc4_vg1/emc4_lv1   /rescue              ext3   defaults        0 0
>>
>> any help!
>>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq