check_dell_openmanager.pl

[Jason Ede]

Sorry typing before brain awake...

I mean the snmpd.conf file (located in /etc/snmpd on my system) and at the end of it it has...

smuxpeer .1.3.6.1.4.1.674.10892.1

Jason

From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Rene Rosenberger
Sent: 29 October 2008 09:33
To: Jason Ede; linux-poweredge at dell.com
Subject: AW: check_dell_openmanager.pl

Hi,

snmpd was installed before installing dell openmanage. What do you mean with that:

>> Have you checked snmpd is running and that the DELL OM installation has added a line at the bottom of the file?

Snmpd is running. I have other snmp checks running on that server like check_snmp_storage.pl and they are working fine.

rene

Von: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] Im Auftrag von Jason Ede
Gesendet: Mittwoch, 29. Oktober 2008 10:29
An: linux-poweredge at dell.com
Betreff: RE: check_dell_openmanager.pl

Did you install snmpd before or after open manage? Have you checked snmpd is running and that the DELL OM installation has added a line at the bottom of the file?

Jason


From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Rene Rosenberger
Sent: 29 October 2008 09:19
To: linux-poweredge at dell.com
Subject: check_dell_openmanager.pl

Hi,

i am using that script in nagios to check openmanger:

http://www.nagiosexchange.org/cgi-bin/page.cgi?g=Detailed%2F1437.html;d=1

but i dont know what i am doing wrong. I get no results back.

./check_dell_openmanager.pl -v -H xxx.xxx.xxx.xxx -C public -2 -T dellom_storage
Alarm at 20
The Net::SNMP library is available on your server

Getting SNMP data for oids: .1.3.6.1.4.1.674.10892.1.200.10.1.4.1 .1.3.6.1.4.1.674.10892.1.200.10.1.9.1 .1.3.6.1.4.1.674.10892.1.200.10.1.12.1 .1.3.6.1.4.1.674.10892.1.200.10.1.21.1 .1.3.6.1.4.1.674.10892.1.200.10.1.24.1 .1.3.6.1.4.1.674.10892.1.200.10.1.27.1 .1.3.6.1.4.1.674.10892.1.200.10.1.30.1 .1.3.6.1.4.1.674.10892.1.200.10.1.41.1 .1.3.6.1.4.1.674.10893.1.20.110.13.0

attr = Intrusion Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.30.1
 snmp_response = noSuchObject

attr = Cooling Device Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.21.1
 snmp_response = noSuchObject

attr = Temperature Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.24.1
 snmp_response = noSuchObject

attr = Power Supply Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.9.1
 snmp_response = noSuchObject

attr = Event Log Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.41.1
 snmp_response = noSuchObject

attr = Storage Management Status
 snmp_oid = .1.3.6.1.4.1.674.10893.1.20.110.13.0
 snmp_response = noSuchObject

attr = Memory Device Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.27.1
 snmp_response = noSuchObject

attr = Chassis Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.4.1
 snmp_response = noSuchObject

attr = Voltage Status
 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.12.1
 snmp_response = noSuchObject

Loop through SNMP responses...
Intrusion Status: statuscode = UNKNOWN
Cooling Device Status: statuscode = UNKNOWN
Temperature Status: statuscode = UNKNOWN
Power Supply Status: statuscode = UNKNOWN
Event Log Status: statuscode = UNKNOWN
Storage Management Status: statuscode = UNKNOWN
Memory Device Status: statuscode = UNKNOWN
Chassis Status: statuscode = UNKNOWN
Voltage Status: statuscode = UNKNOWN
UNKNOWN:Intrusion Status=UKNOWN, Cooling Device Status=UKNOWN, Temperature Status=UKNOWN, Power Supply Status=UKNOWN, Event Log Status=UKNOWN, Storage Management Status=UKNOWN, Memory Device Status=UKNOWN, Chassis Status=UKNOWN, Voltage Status=UKNOWN

What can i do to get this script working right?

Greetings rene
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20081029/b051d443/attachment-0001.htm