AW: check_dell_openmanager.pl

[Rene Rosenberger]

Hi,

 

snmpd was installed before installing dell openmanage. What do you mean with
that:

 

>> Have you checked snmpd is running and that the DELL OM installation has
added a line at the bottom of the file?

 

Snmpd is running. I have other snmp checks running on that server like
check_snmp_storage.pl and they are working fine.

 

rene

 

Von: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] Im Auftrag von Jason Ede
Gesendet: Mittwoch, 29. Oktober 2008 10:29
An: linux-poweredge at dell.com
Betreff: RE: check_dell_openmanager.pl

 

Did you install snmpd before or after open manage? Have you checked snmpd is
running and that the DELL OM installation has added a line at the bottom of
the file?

 

Jason

 

 

From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Rene Rosenberger
Sent: 29 October 2008 09:19
To: linux-poweredge at dell.com
Subject: check_dell_openmanager.pl

 

Hi,

 

i am using that script in nagios to check openmanger:

 

http://www.nagiosexchange.org/cgi-bin/page.cgi?g=Detailed%2F1437.html;d=1

 

but i dont know what i am doing wrong. I get no results back.

 

./check_dell_openmanager.pl -v -H xxx.xxx.xxx.xxx -C public -2 -T
dellom_storage

Alarm at 20

The Net::SNMP library is available on your server

 

Getting SNMP data for oids: .1.3.6.1.4.1.674.10892.1.200.10.1.4.1
.1.3.6.1.4.1.674.10892.1.200.10.1.9.1 .1.3.6.1.4.1.674.10892.1.200.10.1.12.1
.1.3.6.1.4.1.674.10892.1.200.10.1.21.1
.1.3.6.1.4.1.674.10892.1.200.10.1.24.1
.1.3.6.1.4.1.674.10892.1.200.10.1.27.1
.1.3.6.1.4.1.674.10892.1.200.10.1.30.1
.1.3.6.1.4.1.674.10892.1.200.10.1.41.1 .1.3.6.1.4.1.674.10893.1.20.110.13.0

 

attr = Intrusion Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.30.1

 snmp_response = noSuchObject

 

attr = Cooling Device Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.21.1

 snmp_response = noSuchObject

 

attr = Temperature Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.24.1

 snmp_response = noSuchObject

 

attr = Power Supply Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.9.1

 snmp_response = noSuchObject

 

attr = Event Log Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.41.1

 snmp_response = noSuchObject

 

attr = Storage Management Status

 snmp_oid = .1.3.6.1.4.1.674.10893.1.20.110.13.0

 snmp_response = noSuchObject

 

attr = Memory Device Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.27.1

 snmp_response = noSuchObject

 

attr = Chassis Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.4.1

 snmp_response = noSuchObject

 

attr = Voltage Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.12.1

 snmp_response = noSuchObject

 

Loop through SNMP responses...

Intrusion Status: statuscode = UNKNOWN

Cooling Device Status: statuscode = UNKNOWN

Temperature Status: statuscode = UNKNOWN

Power Supply Status: statuscode = UNKNOWN

Event Log Status: statuscode = UNKNOWN

Storage Management Status: statuscode = UNKNOWN

Memory Device Status: statuscode = UNKNOWN

Chassis Status: statuscode = UNKNOWN

Voltage Status: statuscode = UNKNOWN

UNKNOWN:Intrusion Status=UKNOWN, Cooling Device Status=UKNOWN, Temperature
Status=UKNOWN, Power Supply Status=UKNOWN, Event Log Status=UKNOWN, Storage
Management Status=UKNOWN, Memory Device Status=UKNOWN, Chassis
Status=UKNOWN, Voltage Status=UKNOWN

 

What can i do to get this script working right?

 

Greetings rene

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20081029/20dd14cf/attachment.htm