check_dell_openmanager.pl

[Rene Rosenberger]

Hi,

 

i am using that script in nagios to check openmanger:

 

http://www.nagiosexchange.org/cgi-bin/page.cgi?g=Detailed%2F1437.html;d=1

 

but i dont know what i am doing wrong. I get no results back.

 

./check_dell_openmanager.pl -v -H xxx.xxx.xxx.xxx -C public -2 -T
dellom_storage

Alarm at 20

The Net::SNMP library is available on your server

 

Getting SNMP data for oids: .1.3.6.1.4.1.674.10892.1.200.10.1.4.1
.1.3.6.1.4.1.674.10892.1.200.10.1.9.1 .1.3.6.1.4.1.674.10892.1.200.10.1.12.1
.1.3.6.1.4.1.674.10892.1.200.10.1.21.1
.1.3.6.1.4.1.674.10892.1.200.10.1.24.1
.1.3.6.1.4.1.674.10892.1.200.10.1.27.1
.1.3.6.1.4.1.674.10892.1.200.10.1.30.1
.1.3.6.1.4.1.674.10892.1.200.10.1.41.1 .1.3.6.1.4.1.674.10893.1.20.110.13.0

 

attr = Intrusion Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.30.1

 snmp_response = noSuchObject

 

attr = Cooling Device Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.21.1

 snmp_response = noSuchObject

 

attr = Temperature Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.24.1

 snmp_response = noSuchObject

 

attr = Power Supply Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.9.1

 snmp_response = noSuchObject

 

attr = Event Log Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.41.1

 snmp_response = noSuchObject

 

attr = Storage Management Status

 snmp_oid = .1.3.6.1.4.1.674.10893.1.20.110.13.0

 snmp_response = noSuchObject

 

attr = Memory Device Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.27.1

 snmp_response = noSuchObject

 

attr = Chassis Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.4.1

 snmp_response = noSuchObject

 

attr = Voltage Status

 snmp_oid = .1.3.6.1.4.1.674.10892.1.200.10.1.12.1

 snmp_response = noSuchObject

 

Loop through SNMP responses...

Intrusion Status: statuscode = UNKNOWN

Cooling Device Status: statuscode = UNKNOWN

Temperature Status: statuscode = UNKNOWN

Power Supply Status: statuscode = UNKNOWN

Event Log Status: statuscode = UNKNOWN

Storage Management Status: statuscode = UNKNOWN

Memory Device Status: statuscode = UNKNOWN

Chassis Status: statuscode = UNKNOWN

Voltage Status: statuscode = UNKNOWN

UNKNOWN:Intrusion Status=UKNOWN, Cooling Device Status=UKNOWN, Temperature
Status=UKNOWN, Power Supply Status=UKNOWN, Event Log Status=UKNOWN, Storage
Management Status=UKNOWN, Memory Device Status=UKNOWN, Chassis
Status=UKNOWN, Voltage Status=UKNOWN

 

What can i do to get this script working right?

 

Greetings rene

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20081029/3cdd8bdb/attachment.htm