PERC error : Unexpected sense error

[David B.]

Hi PE users,

Autocomplete from me. :)

Dixit wikipedia :
http://en.wikipedia.org/wiki/KCQ

Error : SCSI sense data Sense key:  5 Sense code: 24 Sense qualifier:  
0:  Enclosure 0:0 Controller 2, Connector 0 seems to be :
"Illegal Request - invalid field in CDB 
<http://en.wikipedia.org/wiki/SCSI_CDB> (Command Descriptor Block)".

Did someone know what is doing this kind of error ??

Thank you.
David.

David B. a écrit :
> Hi Patrick,
>
> Driver have been updated, but errors are still there. :(
> OMSA was upgraded too (to 5.5)
> From /var/log/messages :
> Oct 21 04:02:27 my-srv Server Administrator: Storage Service EventID: 
> 2095  SCSI sense data Sense key:  5 Sense code: 24 Sense qualifier:  
> 0:  Enclosure 0:0 Controller 2, Connector 0
>
> From TTY_00000000.log  :
> 10/21/08  4:01:48: EVT#08867-10/21/08  4:01:48: 113=Unexpected sense: 
> PD 08(e1/s255), CDB: 12 01 80 00 3a 00, Sense: 70 00 05 00 00 00 00 0a 
> 00 00 00 00 24 00 00 00 00 00^M
>
> Storage controller 2 :
> ID                                            : 2
> Status                                        : Ok
> Name                                          : PERC 5/i Integrated
> Slot ID                                       : Embedded
> State                                         : Ready
> Firmware Version                              : 5.2.1-0067
> Minimum Required Firmware Version             : Not Applicable
> Driver Version                                : 00.00.03.21
>
> Minimum Required Driver Version               : Not Applicable
> Number of Connectors                          : 2
> Rebuild Rate                                  : 30%
> BGI Rate                                      : 30%
> Check Consistency Rate                        : 30%
> Reconstruct Rate                              : 30%
> Alarm State                                   : Not Applicable
> Cluster Mode                                  : Not Applicable
> SCSI Initiator ID                             : Not Applicable
> Cache Memory Size                             : 256 MB
> Patrol Read Mode                              : Auto
> Patrol Read State                             : Stopped
> Patrol Read Rate                              : 30%
> Patrol Read Iterations                        : 62
> Abort check consistency on error              : Not Applicable
> Allow Revertible Hot Spare and Replace Member : Not Applicable
> Auto replace member on predictive failure     : Not Applicable
> Load balance                                  : Not Applicable
>
> Any idea ?
> I'm quite lost for now.
>
> Thank you.
> David.