PERC error : Unexpected sense error

[Patrick_Boyd at Dell.com]

Sense Key B = ABORTED COMMAND
ASC 47 ASCQ 3 = This is some sort of parity error.

This command was a Read. 

This could be several things: 
1) Out of date drivers
2) Drive has errors. What does omreport storage pdisk controller=2 say?

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of David B.
Sent: Friday, October 17, 2008 2:54 AM
To: linux-poweredge-Lists
Subject: PERC error : Unexpected sense error

Hi PE users,

I've got some strange error messages since sometimes, but i can't figure

why.

Did someone know what this means ?

messages :
Oct 17 08:53:45 oi-sauvegarde Server Administrator: Storage Service 
EventID: 2095  SCSI sense data Sense key:  B Sense code: 47 Sense 
qualifier:  3:  Physical Disk 0:0:1 Controller 2, Connector 0

TTY_00000000.log :
10/17/08  8:51:25: EVT#08799-10/17/08  8:51:25: 113=Unexpected sense: PD

01(e1/s1), CDB: 28 00 2a 8e 6c 00 00 00 80 00, Sense: 70 00 0b 00 00 00 
00 0a 00 00 00 00 47 03 00 00 00 0
10/17/08  9:04:53: EVT#08800-10/17/08  9:04:53: 113=Unexpected sense: PD

01(e1/s1), CDB: 28 00 2d 4a 06 80 00 00 80 00, Sense: 70 00 0b 00 00 00 
00 0a 00 00 00 00 47 03 00 00 00 0
10/17/08  9:09:07: EVT#08801-10/17/08  9:09:07:  44=Time established as 
10/17/08  9:09:07; (1792429 seconds since power on)

Other thing, not the same problem i think.
PERC 5/i : seems to be degraded, but all drives are green.

Errors seems to be :
The current driver version 00.00.03.10-rc5 (megaraid_sas) is older than 
the required driver version 00.00.03.13 (megaraid_sas) for a controller 
of model 0x1F03: Controller 2 (PERC 5/i Integrated)

I'm using 2.6.24.1 kernel. I can't use 2.6.26 or newer because omreport 
will stop to see PERC 4/DC controller
(CF "Perc 4/Di, OMSA 5.4 on 2.6.26 not seeing controller" on this list).

Should I upgrade the driver with a patch to the kernel ?

Thank you.
David.

omreport storage controller :
List of Controllers in the system

Controllers
ID                                : 0
Status                            : Ok
Name                              : PERC 4/DC
Slot ID                           : PCI Slot 2
State                             : Ready
Firmware Version                  : 352D
Minimum Required Firmware Version : Not Applicable
Driver Version                    : Not Applicable
Minimum Required Driver Version   : Not Applicable
Number of Connectors              : 2
Rebuild Rate                      : 30%
BGI Rate                          : Not Applicable
Check Consistency Rate            : Not Applicable
Reconstruct Rate                  : Not Applicable
Alarm State                       : Enabled
Cluster Mode                      : Not Applicable
SCSI Initiator ID                 : 7
Cache Memory Size                 : 128 MB
Patrol Read Mode                  : Auto
Patrol Read State                 : Active
Patrol Read Rate                  : Not Applicable
Patrol Read Iterations            : 235

ID                                : 1
Status                            : Ok
Name                              : SCSI Card 39320A Ultra320 SCSI
Slot ID                           : PCI Slot 3
State                             : Ready
Firmware Version                  : Not Applicable
Minimum Required Firmware Version : Not Applicable
Driver Version                    : Not Applicable
Minimum Required Driver Version   : Not Applicable
Number of Connectors              : 2
Rebuild Rate                      : Not Applicable
BGI Rate                          : Not Applicable
Check Consistency Rate            : Not Applicable
Reconstruct Rate                  : Not Applicable
Alarm State                       : Not Applicable
Cluster Mode                      : Not Applicable
SCSI Initiator ID                 : Not Applicable
Cache Memory Size                 : Not Applicable
Patrol Read Mode                  : Not Applicable
Patrol Read State                 : Not Applicable
Patrol Read Rate                  : Not Applicable
Patrol Read Iterations            : Not Applicable

ID                                : 2
Status                            : Non-Critical
Name                              : PERC 5/i Integrated
Slot ID                           : Embedded
State                             : Degraded
Firmware Version                  : 5.2.1-0067
Minimum Required Firmware Version : Not Applicable
Driver Version                    : 00.00.03.10-rc5
Minimum Required Driver Version   : 00.00.03.13
Number of Connectors              : 2
Rebuild Rate                      : 30%
BGI Rate                          : 30%
Check Consistency Rate            : 30%
Reconstruct Rate                  : 30%
Alarm State                       : Not Applicable
Cluster Mode                      : Not Applicable
SCSI Initiator ID                 : Not Applicable
Cache Memory Size                 : 256 MB
Patrol Read Mode                  : Auto
Patrol Read State                 : Stopped
Patrol Read Rate                  : 30%
Patrol Read Iterations            : 62


_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq