OMSA 5.4 LiveCD and PE T105

[Bryan]

If you pass the linux all_generic_ide at the  boot menu to the cd, does the
cd continue to boot?  sata_nv is for Intel boards.  The T105/R905 etc. need
the driver for the HT1100.  I'm working on adding this to the next rev of
the livecd.  I don't have either system to test against, but I stumbled
across a Red Hat kbase on the R905 with a suggested resolution.

On Tue, Oct 14, 2008 at 3:16 PM, Andrew Basson <andrew.basson at gmail.com>wrote:

> Hi,
>
> I am trying to run a DSET against a T105 server using the OMSA 5.4
> LiveCD, however, the CD wont boot. The error message is along the
> lines: No Data found, are you running SCSI? The sha1sum for the iso is
> correct after downloading. I have managed to use the cd on a PE840
> successfully.
>
> Anyone used omsa-54 on a T105 successfully? Do I need boot options for
> the kernel? I suspect that the nv_sata kernel module is missing from
> the OMSA LiveCD. I had to add this module to get CentOS to run on my
> servers.
>
> Thanks Andrew.
>
> Running 470 T105 servers with CentOS 5.0 Software RAID-1.
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20081015/4512f389/attachment.htm