PE1950 molex connector

[Erik Anderson]

Just out of curiosity, which quad card is this? I'm running several of
the Sangoma quad T1/E1 cards (with HWEC) in 1950s and none of them
have required supplemental power. You may want to consider Sangoma if
you can't make things work with your current card.

-Erik

On 10/7/08, Robert von Bismarck <robert.vonbismarck at vtx-telecom.ch> wrote:
> Hello,
>
> I have a somewhat weird question, we're looking at installing a quad E1
> card into a PE1950, and this card needs supplementary power via a
> standard molex plug like those used in harddisks. (see
> http://en.wikipedia.org/wiki/Image:Molex_female_connector.jpg for a
> picture)
> I opened up the PE1950 and did not find any molex plugs where I could
> connect a Y-cable. Did I miss an obvious one, or are there none
> available ?
>
> Thanks for any suggestion,
>
> Cheers,
>
> Robert von Bismarck
> VTX Services SA
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>


-- 
Erik Anderson
http://andersonfam.org