PE1950 molex connector

[Kurt_Olsson at Dell.com]

This is not the first time that someone has asked for supplemental
power.  Had a guy running a very special PMC (PCI mezz card) that also
required molex supplemental power.  Dell rack servers are generally
cable free on the power side of things, since the 2650. So, no, you
aren't missing anything. I know of no supported options for you.



-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Robert von
Bismarck
Sent: Tuesday, October 07, 2008 3:21 AM
To: linux-poweredge-Lists
Subject: PE1950 molex connector

Hello,

I have a somewhat weird question, we're looking at installing a quad E1
card into a PE1950, and this card needs supplementary power via a
standard molex plug like those used in harddisks. (see
http://en.wikipedia.org/wiki/Image:Molex_female_connector.jpg for a
picture)
I opened up the PE1950 and did not find any molex plugs where I could
connect a Y-cable. Did I miss an obvious one, or are there none
available ?

Thanks for any suggestion,

Cheers,

Robert von Bismarck
VTX Services SA

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq