OpenManage web interface and SNMP traps

[Bryan]

The web interface is available.  You'll need to double-check your firewall
rules to ensure port 1311 is open.
You can look at /etc/sysconfig/iptables (assuming firewall is active) to see
if a rule is listed.

As far as configuring SNMP, you might take a look at
http://support.dell.com/support/edocs/software/smitasst/8.0.1/en/ug/itaugaa.htm#1052225and
http://support.dell.com/support/edocs/software/smsom/5.4/en/ug/PDF/OMIUG54.pdf

Both places discuss configuring SNMP to send errors to a monitoring app
(ITA, Nagios, etc.).

Bryan

On Sat, Nov 22, 2008 at 9:33 AM, Gregory Gulik <greg at gulik.org> wrote:

> I've been using mostly Dell Windows servers but we're starting to roll
> out some Linux (CentOS 5.2) again.  A couple features that I've been
> using with the Windows boxes that I can't get to work with Linux are:
>
> 1. The OpenManage web interface isn't there.
>
> 2. Triggering SNMP traps for hardware events.  I know snmp traps do work
> because if I restart snmpd I do receive the "Cold Start" trap but other
> events I've tried to trigger don't work.  With Windows I have traps
> enabled for just about any hardware event on the servers: fan/disk
> failures, case open, PERC card self checks, etc.
>
> I've spent way too many hours on this already and I just can't get those
> to work.
> Help!
>
>
>
> --
> Greg Gulik                                 http://www.gulik.com/greg/
> greg @ gulik.com
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20081123/50f1df5d/attachment.htm