OMSA fails with LSI 22320 U320 HBA installed

Phil Blanchfield Phil.Blanchfield at crc.ca
Wed Nov 5 10:09:02 CST 2008


Thanks Diego!

This worked like a charm.

Phil Blanchfield
CRC Canada

Diego_Leccardi at Dell.com wrote:
> Hi Phil,
>
> Try this: 
>
> Edit the file opt/dell/srvadmin/sm/stsvc.ini file, comment out the line
> containing "vil3=nrsvil".  
>
> I remember a similar issue like this one
>
> 	Diego
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Phil Blanchfield
> Sent: 04 November 2008 21:07
> To: linux-poweredge-Lists
> Subject: OMSA fails with LSI 22320 U320 HBA installed
>
> Hi,
>
> I have a Dell 2850 server with the PCIe riser card option, a PERC 5e, 
> and a PCI-X, LSI 22320 U320 SCSI card.
> I have a single MD1000 on the PERC 5e and currently there is nothing on 
> the LSI HBA. I want to put a couple of tape
> drives on it eventually. The server is running a fully patched RHEL 5.2.
>
> The process dsm_sa_datamgr32 fails
> with a segmentation fault when the LSI 22320 is installed. OMSA works 
> fine when the LSI 22320 is removed.
> Is there some way to get OMSA to ignore the LSI 22320 so that I can use 
> it in my system for tape backup?
>
> I installed OMSA 5.5 (and I also tried 5.3 and 5.4) and it does not come
>
> up. The process dsm_sa_datamgr32 fails
> with a segmentation fault when the LSI 22320 is installed. Here is a 
> section from my /var/log/messages file:
>
> Nov  3 16:44:52 iotemp kernel: ipmi message handler version 39.1
> Nov  3 16:44:52 iotemp kernel: IPMI System Interface driver.
> Nov  3 16:44:52 iotemp kernel: ipmi_si: Trying SMBIOS-specified kcs 
> state machine at i/o address 0xca8, slave address 0x20, irq 0
> Nov  3 16:44:53 iotemp kernel: ipmi: Found new BMC (man_id: 0x0002a2,  
> prod_id: 0x0000, dev_id: 0x20)
> Nov  3 16:44:53 iotemp kernel:  IPMI kcs interface initialized
> Nov  3 16:44:53 iotemp kernel: ipmi device interface
> Nov  3 16:46:16 iotemp kernel: program dsm_sa_datamgr3 is using a 
> deprecated SCSI ioctl, please convert it to SG_IO
> Nov  3 16:46:16 iotemp last message repeated 15 times
> Nov  3 16:46:16 iotemp Server Administrator: Instrumentation Service 
> EventID: 1000  Server Administrator starting
> Nov  3 16:46:16 iotemp Server Administrator: Instrumentation Service 
> EventID: 1012  IPMI status  Interface: OS
> Nov  3 16:46:16 iotemp Server Administrator: Instrumentation Service 
> EventID: 1001  Server Administrator startup complete
> Nov  3 16:46:17 iotemp kernel: dsm_sa_datamgr3[6215]: segfault at 
> 0000000000000065 rip 00000000f7f6b0f5 rsp 00000000ea3f6088 error 4
> Nov  3 16:46:17 iotemp Server Administrator: Instrumentation Service 
> EventID: 1009  Systems Management Data Manager Stopped
>
> The 2850 BIOS is at rev A07 and the PERC 5e is at version 5.2.1-0066
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>   



More information about the Linux-PowerEdge mailing list