Openmanage: Power monitoring: differences between PE 1950 and PE 2950

[Patrick_Fischer at Dell.com]

Check if it is a PE1950 III you will see it in front of the chassie in a
corner.
Only the III support power monitoring.
http://delltechcenter.com/page/Dell+Servers+capable+of+Power+Monitoring



-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Joost Waversveld
Sent: Tuesday, November 04, 2008 3:04 PM
To: linux-poweredge-Lists
Subject: Openmanage: Power monitoring: differences between PE 1950 and
PE 2950

Hi,

This question is more OpenManage related instead of OS related, hope you

don't mind...

We just received two PE 1950's and one PE 2950. We installed the OS and 
Openmanage on all of them (Dell OpenManage server Administrator 5.5.0)..

All is running fine.

We just see one difference. On the PE 2950 the Power Supplies support 
"Power Monitoring" and so we can see what the servers are using, the PE 
1950's appears not to.

On the website of Dell, they say it is possible with an PE 1950 also, so

what am I doing wrong?

Best regards,

Joost Waversveld

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq