R200 temp monitoring

[L.P.H. van Belle]

try this this.

updatedb if not done
locate ipmi | grep modules
load these
modprobe => ipmi_devintf
		ipmi_msghandler
		ipmi_poweroff
		ipmi_si
		ipmi_watchdog

apt-get install ipmitool

run:  ipmitool sensor

should report. 
ipmitool sensor
Temp             | 35.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Temp             | 37.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Ambient Temp     | 19.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 42.000    | 47.000    | na
Planar Temp      | 31.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 67.000    | 72.000    | na
Riser Temp       | 25.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 57.000    | 62.000    | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na
Temp             | 50.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Temp             | 50.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Ambient Temp     | 23.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 42.000    | 47.000    | na
Planar Temp      | 40.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 67.000    | 72.000    | na
Riser Temp       | 40.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 57.000    | 62.000    | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na


your welkom

Louis


>-----Oorspronkelijk bericht-----
>Van: linux-poweredge-bounces at dell.com 
>[mailto:linux-poweredge-bounces at dell.com] Namens Björn Boschman
>Verzonden: dinsdag 4 november 2008 12:17
>Aan: Linux-PowerEdge at dell.com
>Onderwerp: R200 temp monitoring
>
>Hi list,
>
>I'd like to monitor temp values from my R200 units.
>I'm running Ubuntu 8.04.1
>
>Beside coretemp from the Xeon I haven't found any usable 
>modules so far.
>Anybody got chassis temp. monitoring working?
>
>
>BR
>Björn
>
>_______________________________________________
>Linux-PowerEdge mailing list
>Linux-PowerEdge at dell.com
>http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>Please read the FAQ at http://lists.us.dell.com/faq
>