May 2008 Archives by author
Starting: Thu May 1 00:00:21 CDT 2008
Ending: Fri May 16 07:35:23 CDT 2008
Messages: 160
- Debian + OMSA + Nagios 2
Joffrey Agoutin
- Debian + OMSA + Nagios 2
AndydnA
- OMSA 5.4 dsm_sa_ipmi service not set to auto-start after install
Mark Baxter
- Automatic start for 1955
Sergey V. Beduev
- CentOS 4 installer sees /dev/sda, but after boot it's, /dev/sdb (jeff nichols)
Tim Bell
- Ubuntu 7.10 x86_64 on PowerEdge 2970?
Ian Bjorhovde
- Advice on KVM PS2/USB mixture?
Gordan Bobic
- Test
Joshua Braddock
- Software and Firmware repositories broken with openSUSE 10.3?
Joshua Braddock
- Dell OMSA PE 2500 CentOS 5.1
Joshua Braddock
- FW: Dell OMSA PE 2500 CentOS 5.1
Joshua Braddock
- Dell OMSA PE 2500 CentOS 5.1
Joshua Braddock
- PERC 5/i Integrated State Degraded
David Brůha
- PERC 5/i Integrated State Degraded
Brice Capelle
- PERC 5/i Integrated State Degraded
Brice Capelle
- kernel panic on a 2950
Chamberland, Robert
- kernel panic on a 2950
Chamberland, Robert
- disk monitoring
Jens Dueholm Christensen
- No subject
Shane Corbin
- PE6450 OMSA
Shane Corbin
- PE6450 w/PERC 2/DC
Shane Corbin
- Voltage #0x11
Jefferson Cowart
- Dell Servers, SNMP/Linux, & SCOM 2007
Jefferson Cowart
- PE2900 too noisy for office?
Tom Cowin
- Software and Firmware repositories broken with openSUSE 10.3?
Kevin Davidson
- Software and Firmware repositories broken with openSUSE 10.3?
Kevin Davidson
- Software and Firmware repositories broken with openSUSE 10.3?
Kevin Davidson
- Software and Firmware repositories broken with openSUSE 10.3?
Kevin Davidson
- Dell OMSA PE 2500 CentOS 5.1
Kevin Davidson
- Dell OMSA PE 2500 CentOS 5.1
Kevin Davidson
- kernel panic on a 2950
David_Kewley at Dell.com
- reset SMART health status?
Eoin_Mcguinn at Dell.com
- Hard Drive firmware updates through Yum repo?
Jeffrey_L_Mendoza at Dell.com
- Hard Drive firmware updates through Yum repo?
Kurt_Olsson at Dell.com
- Poweredge 2950 - Quad-Core CPU Upgrade?
Michael_Christensen2 at Dell.com
- How to suggest improvements for OpenManage...
Michael_E_Brown at Dell.com
- PE2900 too noisy for office?
Patrick_Boyd at Dell.com
- Monitor drives on PERC 5/i
Patrick_Boyd at Dell.com
- Configuring Patrol Read on PERC5/i
Patrick_Boyd at Dell.com
- PERC 4i/De firmware question
Ram_Sevak at Dell.com
- PE2900 too noisy for office?
Scott_Purcell at Dell.com
- mptscsi hiccup on CentOS 5.1 x86-64?
Brett Dikeman
- How to mirror OMSA repo?
Matt Domsch
- OMSA 5.4 dsm_sa_ipmi service not set to auto-start after install
Matt Domsch
- your mail
Matt Domsch
- Issues with the dell yum repository?
Matt Domsch
- dkms + megaraid_sas and kernel update
Matt Domsch
- Problem installing Fedora on PowerEdge R300
David Duncan
- boot image to upgrade various firmwares
Scott R. Ehrlich
- PERC 2/DC (was No Subject)
J. Epperson
- disk monitoring
Jeff Ewing
- Optimized I/O for storage MD1000: choices RAID50? XFS/JFS/ext3? with LVM
Brice Figureau
- PE2950 DRAC5 - com2 port is currently in use
Alex Forrow
- Howto run DSET silently ?
Marcus Franke
- Problems enabling SSH on DRAC4
David Gates
- Howto run DSET silently ?
Florent Gilain
- Problem installing latest DSET on a RHEL5 server..
Florent Gilain
- Howto run DSET silently ?
Florent Gilain
- Problem installing latest DSET on a RHEL5 server..
Florent Gilain
- Howto run DSET silently ?
Florent Gilain
- Problem installing Fedora on PowerEdge R300
Matias Gut
- trying to install srvadmin-all on AMD-based dells (Centos 4.6)
Michael Hale
- PE6450 OMSA
Jim Hall
- Monitor drives on PERC 5/i
Jerod Hammerstein
- Hard Drive firmware updates through Yum repo?
Hostmaster
- Poweredge 2950 - Quad-Core CPU Upgrade?
Alex Howells
- PE2950/RHEL5 and slow bonding!
Daniel Huntley
- PE2950/RHEL5 and slow bonding!
Daniel Huntley
- Dell Servers, SNMP/Linux, & SCOM 2007
Jones, Marc T
- Dell Servers, SNMP/Linux, & SCOM 2007
Jones, Marc T
- Voltage #0x11
Peter Kjellstrom
- lm_sensors and Dell PE1950
Michael Krell
- Howto restore original ServiceTag
Mikolaj Kucharski
- Howto restore original ServiceTag
Mikolaj Kucharski
- CentOS 4 installer sees /dev/sda, but after boot it's /dev/sdb
Jeff Larsen
- OMSA 5.4 dsm_sa_ipmi service not set to auto-start after install
Jeff Larsen
- Can racadm tell me if DRAC network port has a link?
Jeff Larsen
- CentOS 4 installer sees /dev/sda, but after boot it's /dev/sdb
Jeff Larsen
- Initial configuration of a PE1950
Matt Lawrence
- Issues with the dell yum repository?
Matt Lawrence
- Advice on KVM PS2/USB mixture?
Todd Lyons
- Old disk drive firmware for Maxtor ATLAS10K5_300SAS?
Joe Malicki
- New BIOS update failure case?
Joe Malicki
- disk monitoring
Daniel De Marco
- disk monitoring
Daniel De Marco
- disk monitoring
Daniel De Marco
- disk monitoring
Daniel De Marco
- Dell OM on RHEL5 Server
Aaron McKinnon
- perc monitoring tools for Debian Sarge
Campbell McLeay
- FAQ
David Miller
- boot image to upgrade various firmwares
Louis-David Mitterrand
- boot image to upgrade various firmwares
Louis-David Mitterrand
- perc monitoring tools for Debian Sarge
Andrew Moise
- PE2900 too noisy for office?
Ronan Mullally
- Problem installing Fedora on PowerEdge R300
Jim Nelson
- Advice on KVM PS2/USB mixture?
Jim Nelson
- How to suggest improvements for OpenManage...
Jim Nelson
- PERC 6/i
Kaj Niemi
- PERC 6/i
Kaj Niemi
- kernel panic on a 2950
Kaj Niemi
- platforms PowerUsageTableEntry works on
Kaj Niemi
- kernel panic on a 2950
Kaj Niemi
- platforms PowerUsageTableEntry works on
Kaj Niemi
- PERC 5/i Integrated State Degraded
Kaj Niemi
- megaraid_sas driver update on CenoOS5/PE1950
Christopher Palmer
- CentOS 5.1 + R300 + SAS 6 i/R
Nikos Parastatidis
- sara OMSA on Debian 1955
Nikos Parastatidis
- multipath configuration problems with Oracle VM
Parry, Graham
- PE2900 too noisy for office?
Eugene Pik
- megaraid_sas driver update on CenoOS5/PE1950
Eugene Pik
- CentOS 5.1 + R300 + SAS 6 i/R
Marios Pittas
- Hard Drive firmware updates through Yum repo?
J Potter
- Hard Drive firmware updates through Yum repo?
J Potter
- Hard Drive firmware updates through Yum repo?
J Potter
- Automatic start for 1955
Dan Reagan
- PERC 6/i
Cathy Reaves
- PERC 6/i
Cathy Reaves
- reset SMART health status?
Matthew Rich
- reset SMART health status?
Matthew Rich
- Howto run DSET silently ?
SA
- Optimized I/O for storage MD1000: choices RAID50? XFS/JFS/ext3? with LVM
Philippe SENOT
- boot image to upgrade various firmwares
Matthias Saou
- megasas issues on PERC5/E
Patrick Schreurs
- multipath configuration problems with Oracle VM
Colin Schuster
- Software and Firmware repositories broken with openSUSE 10.3?
Tino Schwarze
- PERC 2/DC (was No Subject)
Tino Schwarze
- FAQ
Tino Schwarze
- Configuring Patrol Read on PERC5/i
Tino Schwarze
- Configuring Patrol Read on PERC5/i
Tino Schwarze
- Can racadm tell me if DRAC network port has a link?
Brian A. Seklecki
- PERC 4i/De firmware question
Smith, Cathy
- PE2950/RHEL5 and slow bonding!
Smith, Cathy
- Advice on KVM PS2/USB mixture?
SJ Stanaitis
- Advice on KVM PS2/USB mixture?
Ricardo Stella
- megaraid_sas driver update on CenoOS5/PE1950
Del Stoliker
- Howto restore original ServiceTag
Sturgis, Grant
- PE2950 DRAC5 - com2 port is currently in use
Kamil Sustiak
- Software and Firmware repositories broken with openSUSE 10.3?
Philip Tait
- Software and Firmware repositories broken with openSUSE 10.3?
Philip Tait
- Software and Firmware repositories broken with openSUSE 10.3?
Philip Tait
- PE2900 too noisy for office?
Steve Thompson
- dkms + megaraid_sas and kernel update
Rainer Traut
- dkms + megaraid_sas and kernel update
Rainer Traut
- dkms + megaraid_sas and kernel update
Rainer Traut
- DRAC5 / iDRAC SNMP Traps and IPMI.
Brad Viviano
- SAS6i/R controller drivers for FC9
Zhaohui Wang
- PE2900 too noisy for office?
Frank Warnke
- Monitor drives on PERC 5/i
Frank Warnke
- Problem installing Fedora on PowerEdge R300
Frank Warnke
- Monitor drives on PERC 5/i
Adam Williams
- Monitor drives on PERC 5/i
Adam Williams
- R905 can't yum install srvadmin-all from hardware repository
Eric Yablonowitz
- Advice on KVM PS2/USB mixture?
Zembower, Kevin
- PERC 5/i Integrated State Degraded
jewing at aconex.com
- FW: Dell OMSA PE 2500 CentOS 5.1
dell at bobich.net
- Linux-PowerEdge Digest, Vol 45, Issue 16
mark c
- Re: Voltage #0x11
michalwd1979
- Re: PE2900 too noisy for office?
michalwd1979
- Howto restore original ServiceTag
jeff nichols
- Advice on KVM PS2/USB mixture?
poweredgemark at gmail
Last message date:
Fri May 16 07:35:23 CDT 2008
Archived on: Fri May 16 07:35:33 CDT 2008
This archive was generated by
Pipermail 0.09 (Mailman edition).