running Perc5/e config utility without reboot?

[Patrick_Boyd at Dell.com]

OMSA will allow you to configure your PERC without the need to reboot.

 

From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Philippe SENOT
Sent: Wednesday, May 21, 2008 9:40 AM
To: linux-poweredge-Lists; npaci-rocks-discussion at sdsc.edu
Subject: running Perc5/e config utility without reboot? 

 

Hi,

I'm using Rocks on my cluster.
I'm planning to connect and use my MD1000 storage (10x 300 Go) and mount it as /home2.
Some calculations are running on the server and nodes.
Without reboot, I would like to access the Perc5/e controler configuration to define raid level and create disks space before to create partition and file system.

Is it possible?
Which commands or utils?

Thanks.

-- 
-------------------------
Philippe SENOT 
Gestionnaire du parc informatique de l'Institut Chimie, Physique et Matériaux
et Responsable informatique du laboratoire LPMC (EA DRED 3941)
Institut de Chimie, Physique et Matériaux
1 Bd Arago, 57078 METZ Cedex 3, FRANCE

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20080521/8be2f60a/attachment.htm