Monitor drives on PERC 5/i

[Patrick_Boyd at Dell.com]

You don't officially have any LSI model. Therefore this tool isn't
officially supported by either Dell or LSI. It does seem to work, but no
official testing has been done. 

And no it won't monitor/manage PERC 3 or 4, CERC, or SAS 5 or 6 cards.
The only way to get comprehensive monitoring of all your cards with one
package is to use OMSA.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Adam Williams
Sent: Wednesday, May 07, 2008 9:51 AM
Cc: linux-poweredge-Lists
Subject: Re: Monitor drives on PERC 5/i

Frank Warnke wrote:
>
> For the times that I do not install OMSA, I use LSI's MegaRAID Storage
> Manager for Linux.  (http://www.lsilogic.com)
>
> I have used it on several Dell PowerEdge 1900's and 2900's with the
PERC 5/i.
>
> Once it is running, go to;
>
>    Tools => Configure => Monitor Configurator
>
> and set up which alerts should send e-mail.
>
>
>   
Does Storage Manager support Ultra320 (PERC4/di) cards or just SAS cards

only?  looking at 
http://www.lsi.com/support/downloads/megaraid/miscellaneous/linux/MSM_Li
nux_2.35-01.txt 
it just says what model numbers it supports, and commands like lspci 
doesn't tel me what model number I have.  How can I find that out?

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq