multipath configuration problems with Oracle VM

[Colin Schuster]

Have you zoned both HBA's so they can see the target luns?  Each HBA
has a unique WWN and needs to be zoned seperately.


On 30/04/2008, Parry, Graham <gparry at fsc-int.com> wrote:
> No I have not installed powerpath... I was but could not as it was giving me
> dependency problems and I could not find all the rpms it needed... So I
> installed the latest 8.08 qlogic driver, and scli, recompiled the kernel ,
> and tried to configure multipath as per this document
> www.dell.com/downloads/global/solutions/ovm_ref_config_final.pdf
>
> However no matter what I do when I use the multipath -v2 -ll command it only
> show me one path....
>
> However if I use the scli it shows me both hbas fine ....
>
> I have also downloaded and run ql-dynamic-tgt-lun-disc-2.5 tool of qlogic
> and it seems to scan both hba's but only ever finds luns on the first one...
>
> Thanks for your reply....
>
>
>
>
>
> Graham Parry
> mailto: gparry at fsc-int.com
>
> Financial Systems Company
> Colombia
> Tel: (57) 1-8651284
> Chile
> Tel: (56) 9 97453107
> USA
> Tel: (1) 786 -2061368
> http://www.fsc-int.com
> -----------------------------------------------------------------------------------------------------------
> Este correo y cualquier archivo anexo son confidenciales y para uso
> exclusivo de Financial Systems Company.
> Queda estrictamente prohibido la utilización, copia o reimpresión del mismo
> por cualquier persona sin la debida autorización.
>
>
> From: Paul M. Dyer [mailto:pmdyer at ctgcentral2.com]
> Sent: Wednesday, April 30, 2008 2:21 PM
> To: Parry, Graham
> Cc: linux-poweredge at lists.us.dell.com
> Subject: Re: multipath configuration problems with Oracle VM
>
> Have you install PowerPath?   We usually see devices as /dev/emcpowera, etc.
>  At that point you can view the paths with "powermt display" and "powermt
> display dev=all"
>
> Paul
> ----- Original Message -----
> From: "Graham Parry" <gparry at fsc-int.com>
> To: linux-poweredge at lists.us.dell.com
> Sent: Wednesday, April 30, 2008 12:07:17 PM (GMT-0600) America/Chicago
> Subject: multipath configuration problems with Oracle VM
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>