drivers for NIC Card PE 1950

[Kaj Niemi]

Hi,


Is this RHEL4 GA or an update? I can't find it right now but could  
have sworn one needed at least Update 2 to install on a PE1950. Note  
that on PE1950s (and 2950s) NIC order is reversed up to RHEL4U5 (Gb1 =  
eth1, Gb2 = eth0) unless you do some magic - see list archives for  
details. In any case you should be installing from the latest update  
if nothing else - currently update 6. The NIC driver seems to be tg3  
on older 1950s and bnx2 on newer, could also be that older systems  
originally got installed with tg3.


On Mar 12, 2008, at 00:50, Al Sparks wrote:

> I am attempting to load RedHat 4 on a PE 1950.  I load in Disk1, and
> at the prompt, type in,
>
>     linux askmethod
>
> My intention is to load via HTTPD.
>
> However, there doesn't seem to be any network drivers that match the
> PE 1950.  So I end up at the select drivers dialog box, where I've
> made several attempts.
>
> Is there any network drivers for RH4 that matches a typical PE 1950?
>    === Al
>
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq




HTH

Kaj
-- 
Kaj J. Niemi
<kajtzu at basen.net>
+358 45 63 12000



-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3811 bytes
Desc: not available
Url : http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20080311/9fe1b71f/attachment.p7s