UPDATE - scsi_mod probing LUNs (again)

[Sturgis, Grant]

Shyam_Iyer at Dell.com wrote:
>  >I just noticed this:
> 
>  >[root at badserver ~]$ cat /sys/module/scsi_mod/max_luns
>  >1
> 
>  >where on the one that works:
> 
>  >[root at goodserver ~]$ cat /sys/module/scsi_mod/max_luns
>  >254
> 
> 
> Possible that the scsi inquiry to report lun is returning 1 and hence
> the max_luns is set to 1.
> 
> Is it ok to ask you to report the output of sg_luns (sg3_utils package)
> or running scu utility to get the ouput of the "report lun" inquiry
> command?

This is new territory for me..


[root at badserver ~]# sg_luns /dev/sg3
Lun list length = 8 which imples 1 lun entry
Report luns [select_report=0]:
     0000000000000000

> 
> 
> Thanks,
> Shyam
> 

This electronic message transmission is a PRIVATE communication which
contains information which may be confidential or privileged. The
information is intended to be for the use of the individual or entity
named above. If you are not the intended recipient, please be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited. Please notify the sender  of the delivery
error by replying to this message, or notify us by telephone
(877-633-2436, ext. 0), and then delete it from your system.