scsi_mod probing LUNs (again)

[Sturgis, Grant]

Good day, all,

I recently asked the list about probing LUNs through a qla2200 HBA.  The 
answer was adding:

options scsi_mod max_luns=255

to modprobe.conf, remake the initrd and reboot.  That worked fine...

But, now I am trying to do the exact same thing on another PE1950 
running RHEL 4, and am having no luck.

The device we are attaching is a Spectralogic tape library with several 
tape drives inside.  The host is only seeing the library (lun 0) and not 
the drives (luns > 0).

Is there a way to enable debugging for scsi_mod to see what is going 
wrong?  Does anyone have any other suggestions?

Thanks for any help,

Grant
--------------



Pardon this:

This electronic message transmission is a PRIVATE communication which
contains information which may be confidential or privileged. The
information is intended to be for the use of the individual or entity
named above. If you are not the intended recipient, please be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited. Please notify the sender  of the delivery
error by replying to this message, or notify us by telephone
(877-633-2436, ext. 0), and then delete it from your system.