Mixing SAS and SATA drives

Hostmaster Hostmaster at computerservicecentre.com
Tue Mar 4 03:49:37 CST 2008


>>>Can't mix SATA and SAS disks. So we can't supply 2X73GB, SAS, 3.5-inch,
>>>15.000 rpm Hard Drive 4X750GB, SATA, 3.5-inch, 7200 rpm Hard Drive.
>>>Instead I've configured 2X73GB, SAS, 3.5-inch, 15.000 rpm Hard Drive
>>>4X400GB, SAS, 3.5-inch, 10,000 rpm Hard Drive.

>Can I do this and if I can how do I get Dell to supply me with that 
>configuration.

AFAIK its *technically* possible to mix them, however it isn't a Dell supported
configuration, therefore they won't sell them that way. Several of the guys from
Enterprise Storage frequent these lists, so they will be able to give you the
final word, but it might just be easier to buy the server with the supported
config (ie just the two SAS drives for the OS), and then put a separate order
for the four SATA drives, but check with someone who knows the PERC6/i better
than me before buying!

Best Regards, 
Richard Garner (A+, N+, AMBCS, MOS-O)

All E-Mail communications are monitored in addition to being content checked for malicious codes or viruses. The success of scanning products is not guaranteed, therefore the recipient(s) should carry out any checks that they believe to be appropriate in this respect.

This message (including any attachments and/or related materials) is confidential to and is the property of Computer Service Centre, unless otherwise noted. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.

Any views or opinions presented are solely those of the author and do not necessarily represent those of Computer Service Centre.



More information about the Linux-PowerEdge mailing list