Getting Dell SNMP MIB to work on Debian?

[Zembower, Kevin]

I'm still struggling to get the Dell 18092 MIB to work on my Debian etch
host. I can't seem to get dsm_sa_snmp32d working. 

One thread I read said that I should be able to run 'dataeng
enablesnmp', but this doesn't seem to work:
centernet:~# snmpwalk -v2c -c xxxxxxxx localhost .1.3.6.1.4.1.674.10892
SNMPv2-SMI::enterprises.674.10892 = No more variables left in this MIB
View (It is past the end of the MIB tree)
centernet:~# ps aux |grep dsm
root      2425  0.0  0.8 127660  4592 ?        Ssl  Jun10   0:46
/opt/dell/srvadmin/dataeng/bin/dsm_sa_datamgr32d
root      2456  0.0  0.4  21984  2200 ?        Ssl  Jun10   0:00
/opt/dell/srvadmin/dataeng/bin/dsm_sa_eventmgr32d
root      2559  0.0  0.1   3456   640 ?        Ss   Jun10   0:00
/opt/dell/srvadmin/iws/bin/linux/dsm_om_connsvc32d -run
root      2560  0.0  7.5 228840 38832 ?        Sl   Jun10  13:36
/opt/dell/srvadmin/iws/bin/linux/dsm_om_connsvc32d -run
root     23638  0.0  0.1   1644   552 pts/0    S+   11:21   0:00 grep
dsm
centernet:~# /etc/init.d/dataeng enablesnmp
Data Engine SNMP enabled
centernet:~# ps aux |grep dsm
root      2425  0.0  0.8 127660  4592 ?        Ssl  Jun10   0:46
/opt/dell/srvadmin/dataeng/bin/dsm_sa_datamgr32d
root      2456  0.0  0.4  21984  2200 ?        Ssl  Jun10   0:00
/opt/dell/srvadmin/dataeng/bin/dsm_sa_eventmgr32d
root      2559  0.0  0.1   3456   640 ?        Ss   Jun10   0:00
/opt/dell/srvadmin/iws/bin/linux/dsm_om_connsvc32d -run
root      2560  0.0  7.5 228840 38832 ?        Sl   Jun10  13:36
/opt/dell/srvadmin/iws/bin/linux/dsm_om_connsvc32d -run
root     23661  0.0  0.1   1644   552 pts/0    S+   11:21   0:00 grep
dsm
centernet:~# snmpwalk -v2c -c xxxxxxxx localhost .1.3.6.1.4.1.674.10892
SNMPv2-SMI::enterprises.674.10892 = No more variables left in this MIB
View (It is past the end of the MIB tree)
centernet:~#

I am able to manually run dsm_sa_snmp32d, but I still can't access the
Dell MIBs:
centernet:/var/log# locate dsm_sa
<snip>
/opt/dell/srvadmin/dataeng/bin/dsm_sa_snmp32d
/opt/dell/srvadmin/dataeng/bin/dsm_sa_snmp32d.5.8.0.4938
<snip>
centernet:/var/log# /opt/dell/srvadmin/dataeng/bin/dsm_sa_snmp32d
centernet:/var/log# ps aux |grep dsm
root      2425  0.0  0.8 127660  4592 ?        Ssl  Jun10   0:46
/opt/dell/srvadmin/dataeng/bin/dsm_sa_datamgr32d
root      2456  0.0  0.4  21984  2200 ?        Ssl  Jun10   0:00
/opt/dell/srvadmin/dataeng/bin/dsm_sa_eventmgr32d
root      2559  0.0  0.1   3456   640 ?        Ss   Jun10   0:00
/opt/dell/srvadmin/iws/bin/linux/dsm_om_connsvc32d -run
root      2560  0.0  7.5 228840 38832 ?        Sl   Jun10  13:36
/opt/dell/srvadmin/iws/bin/linux/dsm_om_connsvc32d -run
root     23819  1.3  0.5  47248  2880 ?        Ssl  11:26   0:00
/opt/dell/srvadmin/dataeng/bin/dsm_sa_snmp32d
root     23827  0.0  0.1   1648   552 pts/0    S+   11:26   0:00 grep
dsm
centernet:/var/log# snmpwalk -v2c -c xxxxxxxx localhost
.1.3.6.1.4.1.674.10892
SNMPv2-SMI::enterprises.674.10892 = No more variables left in this MIB
View (It is past the end of the MIB tree)
centernet:/var/log#

I did just notice these messages in /var/log/daemon:
Jun 20 11:09:53 cn2 snmpd[26225]: Received TERM or STOP signal...
shutting down... 
Jun 20 11:09:58 cn2 snmpd[23328]: cache has existing timer id. 
Jun 20 11:09:58 cn2 snmpd[23328]: /etc/snmp/snmpd.conf: line 429:
Warning: Unknown token: smuxpeer. 
Jun 20 11:09:58 cn2 snmpd[23328]: NET-SNMP version 5.2.3

I thought that this was the correct entry in /etc/snmp/snmpd.conf:
centernet:/var/log# tail -2 /etc/snmp/snmpd.conf 
# Allow Systems Management Data Engine SNMP to connect to snmpd using
SMUX
smuxpeer .1.3.6.1.4.1.674.10892.1
centernet:/var/log#

Any suggestions on what I'm doing wrong? Is the sequence or order in
which I'm doing thing significant? Thanks in advance for all your help
and advice.

-Kevin

Kevin Zembower
Internet Services Group manager
Center for Communication Programs
Bloomberg School of Xxxxxxxx Health
Johns Hopkins University
111 Market Place, Suite 310
Baltimore, Maryland  21202
410-659-6139