OM and MD3000

[Charles Knox]

Hi Aaron,
   I am running OMSA 5.4 on a PE1800 running RHEL 4 update 6:

[root at kookaburra ~]# omreport system version
Version Report

---------------------
Main System Chassis
---------------------

Name       : BIOS
Version    : A07
Updateable : N/A


Name       : BMC
Version    : 1.72
Updateable : N/A

----------
Software
----------

Name       : Red Hat Enterprise Linux AS
Version    : release 4 (Nahant Update 6) Kernel 2.6.9-67.0.15.ELsmp (x86_64)
Updateable : N/A


Name       : Dell Server Administrator
Version    : 5.4.0
Updateable : N/A

---------------
PERC Firmware
---------------

Name       : CERC SATA 1.5/6ch
Version    : 4.1-0 (Bld 7419)
Updateable : N/A


Name       : LSI Logic 1030 Ultra320 SCSI Adapter 
Version    : N/A
Updateable : N/A

[root at kookaburra ~]#

So you should be able to run the 5.4 version.  I installed this from the
Repository http://linux.dell.com/repo/software/

Charley Knox
Dept. of Astronomy
Case Western Reserve University


-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Aaron McKinnon
Sent: Thursday, June 05, 2008 4:22 PM
To: Patrick_Boyd at dell.com
Cc: linux-poweredge at lists.us.dell.com
Subject: Re: OM and MD3000

As best I can tell 5.1 is the latest for the 2.6.9 based kernels 
(RHEL4). Is that the case?

-Aaron

Patrick_Boyd at Dell.com wrote:
> OM does not manage MD3000's, but for your PERC 6/E you need OM 5.3 or
> greater.
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Aaron McKinnon
> Sent: Thursday, June 05, 2008 1:56 PM
> To: linux-poweredge-Lists
> Subject: OM and MD3000
>
> I have a MD3000 and a Perc6e wich OM 5.1 doesn't seem to see... Do I 
> need to upgrade to a newer version? It only seems to see my internal 
> disks...
>
> # omreport storage vdisk
> List of Virtual Disks in the System
>
> Controller PERC 5/i Integrated (Embedded)
> ID                  : 0
> Status              : Ok
> Name                : Virtual Disk 0
> State               : Ready
> Progress            : Not Applicable
> Layout              : RAID-1
> Size                : 136.13 GB (146163105792 bytes)
> Device Name         : /dev/sda
> Type                : SAS
> Read Policy         : No Read Ahead
> Write Policy        : Write Back
> Cache Policy        : Not Applicable
> Stripe Element Size : 64 KB
>
> Controller SAS5e (Slot 2)
> No virtual disks found
>
>
> ####################################
>
>
> # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 08 Lun: 00
>   Vendor: DP       Model: BACKPLANE        Rev: 1.05
>   Type:   Enclosure                        ANSI SCSI revision: 05
> Host: scsi0 Channel: 02 Id: 00 Lun: 00
>   Vendor: DELL     Model: PERC 5/i         Rev: 1.03
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi1 Channel: 00 Id: 17 Lun: 00
>   Vendor: DELL     Model: MD1000           Rev: A.04
>   Type:   Enclosure                        ANSI SCSI revision: 05
> Host: scsi1 Channel: 02 Id: 00 Lun: 00
>   Vendor: DELL     Model: PERC 6/E Adapter Rev: 1.11
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi1 Channel: 02 Id: 01 Lun: 00
>   Vendor: DELL     Model: PERC 6/E Adapter Rev: 1.11
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 00
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 01
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 02
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 03
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 04
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 05
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 06
>   Vendor: DELL     Model: MD3000           Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 06 Lun: 31
>   Vendor: DELL     Model: Universal Xport  Rev: 0617
>   Type:   Direct-Access                    ANSI SCSI revision: 05
>
> -Aaron McKinnon
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
>   

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq