RHEL 5.2 iSCSI Host Freezes When Starting iscsi At Boot

[Nathan Curry]

I did try that as well.  Here is a copy of my fstab.

LABEL=/                 /                       ext3    defaults
1 1
/dev/VolGroup00/LogVol00 /home                   ext3    defaults
1 2
/dev/VolGroup00/LogVol01 /var                    ext3    defaults
1 2
LABEL=/boot             /boot                   ext3    defaults
1 2
tmpfs                   /dev/shm                tmpfs   defaults
0 0
devpts                  /dev/pts                devpts  gid=5,mode=620
0 0
sysfs                   /sys                    sysfs   defaults
0 0
proc                    /proc                   proc    defaults
0 0
LABEL=SWAP-sda2         swap                    swap    defaults
0 0
LABEL=/data             /data                   ext3    _netdev,acl             0 0
LABEL=/info             /info                   ext3    _netdev,acl     0 0


Thanks,

Nate

-----Original Message-----
From: Paul M. Dyer <pmdyer at ctgcentral2.com>
To: curry at mosaicatm.com
Cc: linux-poweredge at dell.com
Subject: Re: RHEL 5.2 iSCSI Host Freezes When Starting iscsi At Boot
Date: Thu, 24 Jul 2008 10:33:31 -0500 (CDT)

try using _netdev in your /etc/fstab.

LABEL=/sdc              /sdc             ext3    defaults,noatime,_netdev 0 0

Paul

----- Original Message -----
From: "Nathan Curry" <curry at mosaicatm.com>
To: linux-poweredge at dell.com
Sent: Thursday, July 24, 2008 10:26:33 AM (GMT-0600) America/Chicago
Subject: RHEL 5.2 iSCSI Host Freezes When Starting iscsi At Boot

Hi everybody,

 

I have setup a new RHEL 5 host on my MD3000i a few days ago and The
system won't boot if the "chkconfiig iscsi on" is set.  If I set it to
off then the system boots up fine and I can start iscsi and see my
devices properly.  I believe that the iscsi is starting too soon but I
am not sure how to change it or if that is actually the problem.  I was
on the phone with the Dell support techs and it worked for 4 reboots but
when I setup LVM on the virtual disk and partitioned it the problem
started happening again.  If anyone has any ideas I am all ears.

 

Thanks,

 

Nate


_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq