RHEL 5.2 iSCSI Host Freezes When Starting iscsi At Boot

[Shyam_Iyer at Dell.com]

You would need to label it before you boot because the LUN reordering
would happen.

So, what you think is sdc could have been reordered to whatever you boot
disk is.

So, label the new virtual disk with "mklabel" before rebooting.

Thanks,
Shyam Iyer
Linux Engineering.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Nathan Curry
Sent: Thursday, July 24, 2008 8:57 PM
To: linux-poweredge-Lists
Subject: RHEL 5.2 iSCSI Host Freezes When Starting iscsi At Boot

Hi everybody,

 

I have setup a new RHEL 5 host on my MD3000i a few days ago and The
system won't boot if the "chkconfiig iscsi on" is set.  If I set it to
off then the system boots up fine and I can start iscsi and see my
devices properly.  I believe that the iscsi is starting too soon but I
am not sure how to change it or if that is actually the problem.  I was
on the phone with the Dell support techs and it worked for 4 reboots but
when I setup LVM on the virtual disk and partitioned it the problem
started happening again.  If anyone has any ideas I am all ears.

 

Thanks,

 

Nate


_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq