64bit etch poweredge PowerEdge 2950 scsi error

[L.P.H. van Belle]

try installing kernel 2.6.26 ( or 2.6.25 from debian lenny ) 

there are several fixes for the magaraid_sas modules

Louis
 

>-----Oorspronkelijk bericht-----
>Van: linux-poweredge-bounces at dell.com 
>[mailto:linux-poweredge-bounces at dell.com] Namens Jens_Heinz at dell.com
>Verzonden: donderdag 17 juli 2008 13:36
>Aan: dellpoweredge at semantico.com; linux-poweredge at lists.us.dell.com
>Onderwerp: RE: 64bit etch poweredge PowerEdge 2950 scsi error
>
>Hi,
>
>should be an issue of megaraid_sas module with revision below 0.0.3.9.
>
>see: 
>
>http://www.lsi.com/support/downloads/megaraid/sas/hardware_driv
>ers/linux
>/03.09-1-rhel40-all.txt
>
>applies to suse and other linux too. 
>
>jens. 
>
>-----Original Message-----
>From: linux-poweredge-bounces at dell.com
>[mailto:linux-poweredge-bounces at dell.com] On Behalf Of semantico
>Sent: Donnerstag, 17. Juli 2008 13:30
>To: linux-poweredge-Lists
>Subject: 64bit etch poweredge PowerEdge 2950 scsi error
>
>Hi Peeps,
>
>We've installed 2 new poweredges and they're both erroring with this:-
>
>Jul  3 04:13:29 csppmweb03a kernel: FAILED Jul  3 04:13:29 csppmweb03a
>kernel: status = 1, message = 00, host = 0, driver = 08 Jul  3 04:13:29
>csppmweb03a kernel: <6>sd: Current: sense key: Illegal Request Jul  3
>04:13:29 csppmweb03a kernel: Additional sense: Invalid command 
>operation
>code Jul  3 04:13:29 csppmweb03a kernel: FAILED
>
>Any ideas?
>
>cheers,
>
>Giles.
>
>_______________________________________________
>Linux-PowerEdge mailing list
>Linux-PowerEdge at dell.com
>http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>Please read the FAQ at http://lists.us.dell.com/faq
>
>_______________________________________________
>Linux-PowerEdge mailing list
>Linux-PowerEdge at dell.com
>http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>Please read the FAQ at http://lists.us.dell.com/faq
>