PE2900 and OMSA 5.4.0

[Adam Williams]

this server has been in operation since october 06.  i installed the 
firmware, software, and hardware repo's into yum and installed OMSA 5.1 
or so on it and its been keeping itself up to date since then.  This is 
what is installed:

srvadmin-omacore-5.4.0-231.i386
srvadmin-isvc-5.4.0-231.i386
srvadmin-racadm5-5.4.0-231.i386
srvadmin-webserver-5.4.0-231.i386
srvadmin-deng-5.4.0-231.i386
srvadmin-ipmi-5.4.0-231.rhel5.i386
srvadmin-iws-5.4.0-231.i386
srvadmin-racvnc-5.4.0-231.i386
srvadmin-base-5.4.0-231.i386
srvadmin-racser-5.4.0-231.i386
srvadmin-odf-5.4.0-231.i386
srvadmin-hapi-5.4.0-231.i386
srvadmin-rac4-components-5.4.0-231.i386
srvadmin-old-5.4.0-231.i386
srvadmin-racdrsc4-5.4.0-231.i386
srvadmin-storage-5.4.0-231.i386
srvadmin-diagnostics-5.4.0-231.i386
srvadmin-omilcore-5.4.0-231.i386
srvadmin-omauth-5.4.0-231.rhel5.i386
srvadmin-racadm4-5.4.0-231.i386
srvadmin-rac5-components-5.4.0-231.i386
srvadmin-omhip-5.4.0-231.i386
srvadmin-racdrsc5-5.4.0-231.i386
srvadmin-rac4-5.4.0-231.i386
srvadmin-rac3-5.4.0-231.i386
srvadmin-syscheck-5.4.0-231.i386
srvadmin-racsvc-5.4.0-231.i386
srvadmin-cm-5.4.0-231.i386
srvadmin-racser-devel-5.4.0-231.i386
srvadmin-storageservices-5.4.0-231.i386
srvadmin-all-5.4.0-231.i386
srvadmin-jre-5.4.0-231.i386
srvadmin-rac3-components-5.4.0-231.i386
srvadmin-racdrsc3-5.4.0-231.i386
srvadmin-rac5-5.4.0-231.i386


srvadmin-services.sh stop
Shutting down DSM SA Shared Services:                      [  OK  ]


Shutting down DSM SA Connection Service:                   [  OK  ]


srvadmin-services.sh start
Starting mptctl:
Waiting for mptctl driver registration to complete:
                                                           [  OK  ]

Starting Systems Management Device Drivers:
Starting dell_rbu:                                         [  OK  ]
Starting ipmi driver:                                      [  OK  ]
Starting Systems Management Device Drivers:
Starting dell_rbu: Already started                         [  OK  ]
Starting ipmi driver:                                      [  OK  ]
Starting Systems Management Data Engine:
Starting dsm_sa_datamgr32d:                                [  OK  ]
Starting dsm_sa_eventmgr32d:                               [  OK  ]
Starting dsm_sa_snmp32d:                                   [  OK  ]
Starting DSM SA Shared Services:                           [  OK  ]

Starting DSM SA Connection Service:                        [  OK  ]


Nick_Parrott at Dell.com wrote:
> Can you recall doing the install? The Storage component is optional, and
> you do have to select which components of OMSA to install.
>
> You may be able to re-run the install.py, but I'd personally be tempted
> to pull it out and and reinstall.. 
>
> Maybe someone can clarify if "upgrading" the installation works ok..
> I've never done it
>
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Adam Williams
> Sent: 07 July 2008 17:24
> To: linux-poweredge-Lists
> Subject: PE2900 and OMSA 5.4.0
>
> I have an original PE2900 running centos 5.2 and OMSA 5.4.0.  On the web
>
> interface, when I click on the storage link on the left pane, in the 
> right pane it says "Storage Dashboard" and under that "No storage 
> controllers detected."  But this server has a PERC5i in it.  Why is it 
> not seeing it? 
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>